Oregon 34" RSN Harvester Bar (3/4" Pitch) 54 Drive Links 341SNCT146 for Waratah
SKU
ORH 341SNCT146
Oregon 3/4" pitch sprocket-nose guide bars are built from solid, one piece 3/8" thick alloy steel with precision milled grooves. The rails are chamfered and have chain lead-ins at the bar tail. These bars can be restraightened if bent during cutting mishaps. The patented Cradle sprocket-tooth design results in the critical nose-sprocket area being exceptionally strong and reliable. Nose can be replaced by removing 5 rivets.
$334.99
| Length | 34" (85cm) |
|---|---|
| Pitch | 3/4" (.750") |
| Gauge | .122" (3.1mm) |
| Drive Link Count | 54 Drive Links |
| Tooth Count | 9/10 Teeth |
| Bar Mount | T146 |
| Guide Bar Code | SN |
| WARNING: All harvester chain is intended for use on mechanized harvesting equipment only and should never be used on hand-held chainsaws. Depth-gauge settings, grind angles and other features on harvester chain is more aggressive in order to obtain maximum productivity from mechanized saws; these features can cause high levels of kickback, or increase other risk factors which can lead to a greater danger of injury to the operator or bystanders. DO NOT install harvester chain on hand-held chainsaws. |
Write Your Own Review