Item # WPP 46RPS
WoodlandPRO 46RPS (.404" Pitch) Hyper Skip Ripping Chain
$0.45 - $499.99
WoodlandPRO 46RPS is a specialty ripping chain designed to be used exclusively on portable sawmill slabbing machines, such as the Lucas and Peterson sawmills. It is built with a hyper skip chain sequence, which allows for greater chip clearance on super wide cuts. It is most commonly used to slab logs, burls and stumps. This ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log, and because it has few cutters, it is quicker to sharpen. This chain is recommended for milling purposes only, therefor not designed for standard hand held use. WoodlandPRO 46RPS chain sharpens with a 7/32" round file or 3/16" grinding wheel.
- Pitch.404"
- Gauge.063" (1.6mm)
- Cutter TypeRipping
Sequence Super Skip (Hyper Skip)
Recommended Saw Sizes Lucas Mill Slabber
Recommended Bar Lengths 50" (130cm) and Larger
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 27RX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes Lucas Mill Slabber
Recommended Bar Lengths 50" (130cm) and Larger
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 27RX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Pitch.404"
- Gauge.063" (1.6mm)
- Cutter TypeRipping
Sequence Super Skip (Hyper Skip)
Recommended Saw Sizes Lucas Mill Slabber
Recommended Bar Lengths 50" (130cm) and Larger
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 27RX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes Lucas Mill Slabber
Recommended Bar Lengths 50" (130cm) and Larger
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 27RX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.