Item # WPL 30RP84
WoodlandPRO 24" Ripping Chain Loop (30RP 84 Drive Links) 30RP84
$19.99
In Stock
WoodlandPRO 30RP is a specialty chainsaw chain known as ripping chain. Ripping chain is designed to cut efficiently with the grain of the wood, unlike standard saw chain. It is most commonly used to slab logs, burls and stumps. Ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log. On the contrary, standard saw chain is designed to sever wood across the grain, and when you saw parallel to the grain, your cutting speed falls dramatically, and your sawn surface becomes very rough. This chain is recommended for milling purposes only, therefor not designed for standard hand held use. All WoodlandPRO saw chain is made with professional features, including industrial chrome plated cutters for great stay sharp qualities, and a patented alloy steel chassis to lessen stretch during break in. This chain has limited kickback reductions features, so it is recommeneded for professional use only. WoodlandPRO 30RP chain sharpens with a 7/32" round file or 3/16" grinding wheel.
- Length24" (60cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size84 Drive Links
- Drive Link Count84 Drive Links
- Cutter TypeRipping
Sequence Standard (Full Comp)
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36" (40-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Stihl Part Number 33RMX
Replaces Oregon Part Number 72RD
Replaces Carlton Part Number A1EP-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36" (40-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Stihl Part Number 33RMX
Replaces Oregon Part Number 72RD
Replaces Carlton Part Number A1EP-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length24" (60cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size84 Drive Links
- Drive Link Count84 Drive Links
- Cutter TypeRipping
Sequence Standard (Full Comp)
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36" (40-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Stihl Part Number 33RMX
Replaces Oregon Part Number 72RD
Replaces Carlton Part Number A1EP-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36" (40-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Stihl Part Number 33RMX
Replaces Oregon Part Number 72RD
Replaces Carlton Part Number A1EP-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| CubCadet | CS5018, CS5220, CS5720 |
| Dolmar | 109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch) |
| Dolmar | PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F |
| Efco | 156 (.375 Pitch), 165 |
| Efco | 181 (After Aug 07), MT 7200, MT 8200 |
| Fairmount Hydraulic | HCS816, HCS820, HCS824 |
| Homelite | 30 |
| Husqvarna | 260, 261, 257, 254, 262 XP, 346 XP, 357 XP, 359, 362 (8.2mm Studs), 455, 455 Rancher, 55, 55 Rancher, 555, 560, 460, 460 Rancher |
| Husqvarna | 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher |
| Jonsered | 2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch) |
| Jonsered | 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186 |
| Makita | DCS 510, DCS460, EA5000P |
| Makita | DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL |
| McCulloch | 555 |
| Partner | 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65 |
| Poulan/PoulanPRO | 425, 445, 475, 505, PRO415 |
| Poulan/PoulanPRO | 5020AV Poulan Pro |
| Shindawa (SDK) | 550, 575, 577, 680, 695, 757 |
| Solo | 603, 662, 665, 667, 670, 675, 680, 681, 690, 694 |
| Stihl | 024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660 |
| Alpina/Castor | A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600 |
| Solo | 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch) |