Item # WPL 20NK66 10
WoodlandPRO 16" Narrow Kerf Chainsaw Chain Loop (20NK 66 Drive Links) 10 Pack
$99.99
In Stock
WoodlandPRO saw chain is arguably the best value in chainsaw chain available today. We buy WoodlandPRO saw chain in huge quantities, directly from the world's largest saw chain manufacturers, and pass the cost savings on to you. 20NK is a high performance narrow kerf saw chain specifically designed for medium sized professional chainsaws. This chain makes a thinner cut than standard .325" pitch saw chain, so it requires less power from your chainsaw. Many users rave about the performance increases, especially when compared to standard saw chain. Narrow radius semi-chisel cutters have great stay sharp features, while still giving you fast cutting speeds. This chain has limited kickback reductions features, so it is recommeneded for professional use only. Sharpens with a 3/16" round file or 1/8" grinding wheel. 20NK will not perform well unless used in conjunction with a narrow kerf bar.
- Length16" (40cm)
- Pitch.325"
- Gauge.050" (1.3mm) Narrow Kerf
- Chain Size66 Drive Links - 10 Pack
- Drive Link Count66 Drive Links
- Pack Quantity10 Pack
- Cutter TypeSemi-Chisel
Sequence Standard (Full Comp)
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 95TXL, 95VPX, 95VP
Replaces Carlton Part Number K1NK, K1NK-BL
Replaces Husqvarna Part Number H30
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 95TXL, 95VPX, 95VP
Replaces Carlton Part Number K1NK, K1NK-BL
Replaces Husqvarna Part Number H30
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length16" (40cm)
- Pitch.325"
- Gauge.050" (1.3mm) Narrow Kerf
- Chain Size66 Drive Links - 10 Pack
- Drive Link Count66 Drive Links
- Pack Quantity10 Pack
- Cutter TypeSemi-Chisel
Sequence Standard (Full Comp)
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 95TXL, 95VPX, 95VP
Replaces Carlton Part Number K1NK, K1NK-BL
Replaces Husqvarna Part Number H30
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Numbers 95TXL, 95VPX, 95VP
Replaces Carlton Part Number K1NK, K1NK-BL
Replaces Husqvarna Part Number H30
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| Dolmar | PS-5100, PS- 5100 S (.325" Pitch), PS-5105, PS-5105 H (.325" Pitch), PS-510 (.325" Pitch), PS-460 (.325" Pitch), PS-6100 (.325" Pitch) |
| Efco | 147, 152, 962, 156 (.325" Pitch) |
| Fairmount Hydraulic | 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, Limblopper |
| Hitachi | CS40EA |
| Homelite | 130, 150, 290, 300, 340, 150A0, CS50, d3350b |
| Husqvarna | 33, 444, 140, 133, 137, 136, 142, 141, 260, 154, 238, 234, 261, 235, 240, 246, 242, 257, 254, 262 XP, 336, 340, 345, 346 XP, 350, 353, 351, 36, 38, 40, 41, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 545, 550 XP, 339 XP, 543 XP |
| JohnDeere | CS46, CS52, CS56, CS62 |
| Jonsered | 45, 49, 50, 51, 52, 370, 410, 420, 425, 450, 451, 490, 510, 521, 525, 535, 590, 941, 2036 (.325 Pitch), 2040 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2050 (.325 Pitch), 2149 (.325 Pitch), CS 2153 (.325 Pitch), 435, 440 (.325 Pitch), 520SP, CS 2152 (.325 Pitch), 2045 (.325 Pitch), 2145 (.325 Pitch), 2141 (.325 Pitch), 2041 (.325 Pitch), CS 2040 (.325 Pitch), CS 2150 (.325 Pitch), CS 2147 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch) |
| Makita | DCS430, DCS431, DCS520i, DCS6000i |
| Maruyama | D176-PL11, D176-PS11 |
| McCulloch | 46, 4700, 4900, 5000, 5500, 2046AV, 2049AV, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20 |
| Olympyk (Oleo‑Mac) | 941, 945, 950, 951 |
| Partner | 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325) |
| Pioneer | 1074, P-21, P-26, P-28 |
| Poulan/PoulanPRO | 325, 525, 235, 240 (.325 Pitch), S35 |
| RedMax | G390, G450AVS, G455AVS |
| Sears/Craftsman | 35084, 35201 |
| Shindawa (SDK) | 5000 |
| Solo | 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch), 651SP |
| Stanley | CS05, CS06 |
| Tanaka | ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EA |
| Troy Bilt | TB4620, TB4920, TB5018, TB5020 |
| Echo | CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch) |