Item # STL 63PMX
Stihl 63PMX Ripping Chain (Per Drive Link)
$0.67
In Stock
63PMX is a ripping chain designed for specifically for milling with a chainsaw. When run on a chainsaw mill such as the Logosol, it will leave a smooth milled surface. This chain has not been ANSI approved as a low kickback chain, so it should not be used as a standard cross cut chain without specialized training. See warning below.
- LengthPer Drive Link
- Pitch3/8" Low Profile (Picco)
- Gauge.050" (1.3mm)
- Chain SizePer Drive Link
- Drive Link CountPer Drive Link
- Cutter TypeRipping
Sequence Standard
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes 2.3-6.0 cubic inches (38-100cc)
Recommended Bar Lengths 16"-36"(25-40cm)
Kickback Reduction Features None
Replaces Carlton Part Numbers N1C-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes 2.3-6.0 cubic inches (38-100cc)
Recommended Bar Lengths 16"-36"(25-40cm)
Kickback Reduction Features None
Replaces Carlton Part Numbers N1C-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- LengthPer Drive Link
- Pitch3/8" Low Profile (Picco)
- Gauge.050" (1.3mm)
- Chain SizePer Drive Link
- Drive Link CountPer Drive Link
- Cutter TypeRipping
Sequence Standard
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes 2.3-6.0 cubic inches (38-100cc)
Recommended Bar Lengths 16"-36"(25-40cm)
Kickback Reduction Features None
Replaces Carlton Part Numbers N1C-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes 2.3-6.0 cubic inches (38-100cc)
Recommended Bar Lengths 16"-36"(25-40cm)
Kickback Reduction Features None
Replaces Carlton Part Numbers N1C-RP
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.