Stihl 63PM3 (3/8" Low Profile) Picco Micro 3 Chainsaw Chain
Stihl 63PM3 (3/8" Low Profile) Picco Micro 3 Chainsaw Chain
Stihl 63PM3 (3/8" Low Profile) Picco Micro 3 Chainsaw Chain
.375I
.050I
Item # STLP 63PM3
Stihl 63PM3 (3/8" Low Profile) Picco Micro 3 Chainsaw Chain
$0.53 - $579.99
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63 PM3 is part of the Picco Micro 3 series chains. This chain has reduced kickback and low vibration features. 63 PM3 has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel chain.
Priced per Drive Link

  • Pitch
    3/8" Low Profile (Picco)
  • Gauge
    .050" (1.3mm)
  • Cutter Type
    Semi-Chisel
  • Sequence Standard
    Recommended File Size 4.0mm (5/32")
    Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
    Recommended Bar Lengths 10"-18"(25-45cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 63PMC3
    Replaces Oregon Part Numbers 91VG, 91PX
    Replaces Carlton Part Number N1C-BL
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
  • Pitch
    3/8" Low Profile (Picco)
  • Gauge
    .050" (1.3mm)
  • Cutter Type
    Semi-Chisel
  • Sequence Standard
    Recommended File Size 4.0mm (5/32")
    Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
    Recommended Bar Lengths 10"-18"(25-45cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 63PMC3
    Replaces Oregon Part Numbers 91VG, 91PX
    Replaces Carlton Part Number N1C-BL
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Subscribe to our newsletter now for the latest news and special offers