Item # STL 33RS98
Stihl 30" Chainsaw Chain Loop (33RS 98 Drive Links) 3623 005 0098
$53.99
In Stock
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RS is part of the Stihl Rapid Super series. 33RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has reduced vibration features and no kickback reduction features (See warnings below), so it is recommended for professional use only.
- Length30" (75cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size98 Drive Links
- Drive Link Count98 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length30" (75cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size98 Drive Links
- Drive Link Count98 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| Dolmar | PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F |
| Efco | 181 (After Aug 07), MT 7200, MT 8200 |
| Husqvarna | 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher |
| Jonsered | 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186 |
| Makita | DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL |
| Partner | 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65 |
| Poulan/PoulanPRO | 425, 445, 475, 505, PRO415 |
| Shindawa (SDK) | 550, 575, 577, 680, 695, 757 |
| Solo | 603, 662, 665, 667, 670, 675, 680, 681, 690, 694 |
| Stihl | 024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660 |