Stihl 26RM3 (.325" x .063") Rapid Micro 3 Chainsaw Chain
Stihl 26RM3 (.325" x .063") Rapid Micro 3 Chainsaw Chain
Stihl 26RM3 (.325" x .063") Rapid Micro 3 Chainsaw Chain
.325I
.063I
Item # STLP 26RM3

Stihl 26RM3 (.325" x .063") Rapid Micro 3 Chainsaw Chain

$0.54 - $659.99
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RM3 is part of the Stihl Micro 3 series. This chain has reduced kickback and low vibration features. 26RM3 has semi-chisel cutters which work cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain.

Priced per Drive Link

Enter the total number of drive links in the quantity field below


  • Pitch
    .325"
  • Gauge
    .063" (1.6mm)
  • Cutter Type
    Semi-Chisel
  • Sequence Standard
    Recommended File Size 4.5mm (3/16")
    Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
    Recommended Bar Lengths 16"-20"(40-50cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 26RMC3
    Replaces Oregon Part Numbers 22BP, 22BPX
    Replaces Carlton Part Numbers K3C, K3C-GL
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
  • Pitch
    .325"
  • Gauge
    .063" (1.6mm)
  • Cutter Type
    Semi-Chisel
  • Sequence Standard
    Recommended File Size 4.5mm (3/16")
    Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
    Recommended Bar Lengths 16"-20"(40-50cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 26RMC3
    Replaces Oregon Part Numbers 22BP, 22BPX
    Replaces Carlton Part Numbers K3C, K3C-GL
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Subscribe to our newsletter now for the latest news and special offers