Stihl 25RM3 Chainsaw Chain (Per Drive Link)
SKU
STL 25RM3
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 25RM3 is part of the Stihl Micro 3 series. This chain has reduced kickback and low vibration features. 25RM3 has semi-chisel cutters which work cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain.
Priced per Drive Link
Enter the total number of drive links in the quantity field below
$0.48
| Length | Per Drive Link |
|---|---|
| Pitch | .325" |
| Gauge | .058" (1.5mm) |
| Drive Link Count | Per Drive Link |
| Cutter Type | Semi-Chisel |
|
Sequence Standard Recommended File Size 4.5mm (3/16") Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc) Recommended Bar Lengths 16"-20"(40-50cm) Kickback Reduction Features Single-Humped Drive Link Replaces Stihl Part Number 25RMC3 Replaces Oregon Part Numbers 21BP, 21BPX Replaces Carlton Part Numbers K2C, K2C-GL |
| WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual. |
Write Your Own Review