Stihl 24" Chainsaw Chain Loop (33RS3 84 Drive Links) 3624 005 0084

Item # STL 33RS384

Stihl 24" Chainsaw Chain Loop (33RS3 84 Drive Links) 3624 005 0084

Name: Stihl 24" Chainsaw Chain Loop (33RS3 84 Drive Links) 3624 005 0084
SKU: STL 33RS384
Price: 46.99 USD
Availability: InStock

$46.99

In Stock

Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RS3 is part of the Stihl Rapid Super 3 series. This chain has reduced kickback and low vibration features. 33RS3 has chisel cutters which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials.

Shipping Weight 1.5 lbs.

Bailey's is NOT an authorized STIHL Dealer.

OEM parts are new. They come from various sources.

Length
24" (60cm)
Pitch
3/8" (.375")
Gauge
.050" (1.3mm)
Chain Size
84 Drive Links
Drive Link Count
84 Drive Links
Cutter Type
Chisel

Sequence Standard
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Specs

Length
24" (60cm)
Pitch
3/8" (.375")
Gauge
.050" (1.3mm)
Chain Size
84 Drive Links
Drive Link Count
84 Drive Links
Cutter Type
Chisel

Sequence Standard
Recommended File Size 5.2mm (13/64")
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 16"-36"(40-90cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 33RSC3
Replaces Oregon Part Numbers 72LP, 72LPX, 72V
Replaces Carlton Part Numbers A1LM-BL, A1LM-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Fitment

This Item Fits the Following:

CubCadet	CS5018, CS5220, CS5720
Dolmar	109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch)
Dolmar	PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco	156 (.375 Pitch), 165
Efco	181 (After Aug 07), MT 7200, MT 8200
Fairmount Hydraulic	HCS816, HCS820, HCS824
Homelite	30
Husqvarna	260, 261, 257, 254, 262 XP, 346 XP, 357 XP, 359, 362 (8.2mm Studs), 455, 455 Rancher, 55, 55 Rancher, 555, 560, 460, 460 Rancher
Husqvarna	570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher
Jonsered	2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch)
Jonsered	625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186
Makita	DCS 510, DCS460, EA5000P
Makita	DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
McCulloch	555
Partner	550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO	425, 445, 475, 505, PRO415
Poulan/PoulanPRO	5020AV Poulan Pro
Shindawa (SDK)	550, 575, 577, 680, 695, 757
Solo	603, 662, 665, 667, 670, 675, 680, 681, 690, 694
Stihl	024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660
Alpina/Castor	A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Solo	651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch)