Item #Â STLP 23RM3
Stihl 23RM3 (.325" x .050") Rapid Micro 3 Chainsaw Chain
$0.55 - $699.99
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 23RM3 is part of the Stihl Micro 3 series. This chain has reduced kickback and low vibration features. 23RM3 has semi-chisel cutters which work cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain.
Priced per Drive Link
Enter the total number of drive links in the quantity field below
​
- Pitch.325"
- Gauge.050" (1.3mm)
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Specs
- Pitch.325"
- Gauge.050" (1.3mm)
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.