Item # STL 25RS78
Stihl 20" Chainsaw Chain Loop (25RS 78 Drive Links) 3638 005 0078
$35.99
In Stock
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 25RS is part of the Stihl Rapid Super series. 25RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 25RS chain. It is recommended for professional use only.
- Length20" (50cm)
- Pitch.325"
- Gauge.058" (1.5mm)
- Chain Size78 Drive Links
- Drive Link Count78 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended File Size 4.8mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 13"-20"(32-50cm)
Kickback Reduction Features None
Replaces Stihl Part Number 25RSC
Replaces Oregon Part Number 21LP, 21LPX, 34LG
Replaces Carlton Part Number K2L, K2L-BL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 4.8mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 13"-20"(32-50cm)
Kickback Reduction Features None
Replaces Stihl Part Number 25RSC
Replaces Oregon Part Number 21LP, 21LPX, 34LG
Replaces Carlton Part Number K2L, K2L-BL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length20" (50cm)
- Pitch.325"
- Gauge.058" (1.5mm)
- Chain Size78 Drive Links
- Drive Link Count78 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended File Size 4.8mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 13"-20"(32-50cm)
Kickback Reduction Features None
Replaces Stihl Part Number 25RSC
Replaces Oregon Part Number 21LP, 21LPX, 34LG
Replaces Carlton Part Number K2L, K2L-BL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended File Size 4.8mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 13"-20"(32-50cm)
Kickback Reduction Features None
Replaces Stihl Part Number 25RSC
Replaces Oregon Part Number 21LP, 21LPX, 34LG
Replaces Carlton Part Number K2L, K2L-BL
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| Dolmar | PS-5100, PS- 5100 S (.325" Pitch), PS-5105, PS-5105 H (.325" Pitch), PS-510 (.325" Pitch), PS-460 (.325" Pitch), PS-6100 (.325" Pitch) |
| Efco | 147, 152, 962, 156 (.325" Pitch) |
| Fairmount Hydraulic | 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, Limblopper |
| Hitachi | CS40EA |
| Homelite | 130, 150, 290, 300, 340, 150A0, CS50, d3350b |
| Husqvarna | 33, 444, 140, 133, 137, 136, 142, 141, 260, 154, 238, 234, 261, 235, 240, 246, 242, 257, 254, 262 XP, 336, 340, 345, 346 XP, 350, 353, 351, 36, 38, 40, 41, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 545, 550 XP, 339 XP, 543 XP |
| JohnDeere | CS46, CS52, CS56, CS62 |
| Jonsered | 45, 49, 50, 51, 52, 370, 410, 420, 425, 450, 451, 490, 510, 521, 525, 535, 590, 941, 2036 (.325 Pitch), 2040 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2050 (.325 Pitch), 2149 (.325 Pitch), CS 2153 (.325 Pitch), 435, 440 (.325 Pitch), 520SP, CS 2152 (.325 Pitch), 2045 (.325 Pitch), 2145 (.325 Pitch), 2141 (.325 Pitch), 2041 (.325 Pitch), CS 2040 (.325 Pitch), CS 2150 (.325 Pitch), CS 2147 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch) |
| Makita | DCS430, DCS431, DCS520i, DCS6000i |
| Maruyama | D176-PL11, D176-PS11 |
| McCulloch | 46, 4700, 4900, 5000, 5500, 2046AV, 2049AV, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20 |
| Olympyk (Oleo‑Mac) | 941, 945, 950, 951 |
| Partner | 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325) |
| Pioneer | 1074, P-21, P-26, P-28 |
| Poulan/PoulanPRO | 325, 525, 235, 240 (.325 Pitch), S35 |
| RedMax | G390, G450AVS, G455AVS |
| Sears/Craftsman | 35084, 35201 |
| Shindawa (SDK) | 5000 |
| Solo | 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch), 651SP |
| Stanley | CS05, CS06 |
| Tanaka | ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EA |
| Troy Bilt | TB4620, TB4920, TB5018, TB5020 |
| Echo | CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch) |