Item # STL 23RM378
Stihl 20" Chainsaw Chain Loop (23RM3 78 Drive Links) 3687 005 0078
$35.99
In Stock
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 23RM3 is part of the Stihl Micro 3 series. This chain has reduced kickback and low vibration features. 23RM3 has semi-chisel cutters which work cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain.
- Length20" (50cm)
- Pitch.325"
- Gauge.050" (1.3mm)
- Chain Size78 Drive Links
- Drive Link Count78 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Specs
- Length20" (50cm)
- Pitch.325"
- Gauge.050" (1.3mm)
- Chain Size78 Drive Links
- Drive Link Count78 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.5mm (3/16")
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Recommended Bar Lengths 16"-20"(40-50cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces
Stihl Part Number 23RMC3
Oregon Part Numbers 20BP, 20BPX
Carlton Part Numbers K1C, K1C-GL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Fitment
This Item Fits the Following:
| Dolmar | PS-5100, PS- 5100 S (.325" Pitch), PS-5105, PS-5105 H (.325" Pitch), PS-510 (.325" Pitch), PS-460 (.325" Pitch), PS-6100 (.325" Pitch) |
| Efco | 147, 152, 962, 156 (.325" Pitch) |
| Fairmount Hydraulic | 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, Limblopper |
| Hitachi | CS40EA |
| Homelite | 130, 150, 290, 300, 340, 150A0, CS50, d3350b |
| Husqvarna | 33, 444, 140, 133, 137, 136, 142, 141, 260, 154, 238, 234, 261, 235, 240, 246, 242, 257, 254, 262 XP, 336, 340, 345, 346 XP, 350, 353, 351, 36, 38, 40, 41, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 545, 550 XP, 339 XP, 543 XP |
| JohnDeere | CS46, CS52, CS56, CS62 |
| Jonsered | 45, 49, 50, 51, 52, 370, 410, 420, 425, 450, 451, 490, 510, 521, 525, 535, 590, 941, 2036 (.325 Pitch), 2040 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2050 (.325 Pitch), 2149 (.325 Pitch), CS 2153 (.325 Pitch), 435, 440 (.325 Pitch), 520SP, CS 2152 (.325 Pitch), 2045 (.325 Pitch), 2145 (.325 Pitch), 2141 (.325 Pitch), 2041 (.325 Pitch), CS 2040 (.325 Pitch), CS 2150 (.325 Pitch), CS 2147 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch) |
| Makita | DCS430, DCS431, DCS520i, DCS6000i |
| Maruyama | D176-PL11, D176-PS11 |
| McCulloch | 46, 4700, 4900, 5000, 5500, 2046AV, 2049AV, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20 |
| Olympyk (Oleo‑Mac) | 941, 945, 950, 951 |
| Partner | 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325) |
| Pioneer | 1074, P-21, P-26, P-28 |
| Poulan/PoulanPRO | 325, 525, 235, 240 (.325 Pitch), S35 |
| RedMax | G390, G450AVS, G455AVS |
| Sears/Craftsman | 35084, 35201 |
| Shindawa (SDK) | 5000 |
| Solo | 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch), 651SP |
| Stanley | CS05, CS06 |
| Tanaka | ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EA |
| Troy Bilt | TB4620, TB4920, TB5018, TB5020 |
| Echo | CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch) |