Item # STL 63PM361
Stihl 18" Chainsaw Chain Loop (63PM3 61 Drive Links) 3636 005 0061
$27.99
In Stock
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63 PM3 is part of the Picco Micro 3 series chains. This chain has reduced kickback and low vibration features. 63 PM3 has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel chain.
- Length18" (45cm)
- Pitch3/8" Low Profile (Picco)
- Gauge.050" (1.3mm)
- Chain Size61 Drive Links
- Drive Link Count61 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
Recommended Bar Lengths 10"-18"(25-45cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 63PMC3
Replaces Oregon Part Numbers 91VG, 91PX
Replaces Carlton Part Number N1C-BL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
Recommended Bar Lengths 10"-18"(25-45cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 63PMC3
Replaces Oregon Part Numbers 91VG, 91PX
Replaces Carlton Part Number N1C-BL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Specs
- Length18" (45cm)
- Pitch3/8" Low Profile (Picco)
- Gauge.050" (1.3mm)
- Chain Size61 Drive Links
- Drive Link Count61 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
Recommended Bar Lengths 10"-18"(25-45cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 63PMC3
Replaces Oregon Part Numbers 91VG, 91PX
Replaces Carlton Part Number N1C-BL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Recommended File Size 4.0mm (5/32")
Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
Recommended Bar Lengths 10"-18"(25-45cm)
Kickback Reduction Features Single-Humped Drive Link
Replaces Stihl Part Number 63PMC3
Replaces Oregon Part Numbers 91VG, 91PX
Replaces Carlton Part Number N1C-BL
WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
Fitment
This Item Fits the Following:
| Olympyk (Oleo‑Mac) | 240, 241, 244, 935 |
| Stihl | 010, 012, 017, 020, 023, 021, MSE 180 Electric, 025, MSE 140 Electric, MS 181, MS 192 T, 019 T, 018, 009, 015, MS 250, MS 241, MS 211, MS 171, 020 T, MSE 160 Electric, MSE 200 Electric, HT 70 Pole Pruner, MS 231, 011, E 10 Electric, HT 100 Pole Pruner, HT 130 Pole Pruner, HT 73 Pole Pruner, HT 56 Pole Pruner, MS 150 TC, MS 200, MS 201, E 14 Electric, E 140 Electric, E 160 Electric, E 180 Electric, HT 101 Pole Pruner, HT 131 Pole Pruner, HT 250 Pole Pruner, HT 75 Pole Pruner, HTE 60 Pole Pruner, MS 150, MS 170, MS 180, MS 190 T, MS 191 T, MS 200 T, MS 201 T, MS 210, MSA 200 Cordless, MS 230, MSA 160 Cordless, MS 251 |