Stihl 16" Carbide Saw Chain Loop (23RD3 66 Drive Links) 3665 005 0066
.325I
.050I
Stihl 16" Carbide Saw Chain Loop (23RD3 66 Drive Links) 3665 005 0066
Item # STL 23RD366

Stihl 16" Carbide Saw Chain Loop (23RD3 66 Drive Links) 3665 005 0066

$93.99
In Stock
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 23RD3 is part of the Stihl Duro 3 series. This chain has a carbide insert welded to the cutting edge of the saw chain. The carbide insert allows it to stay sharp up to 4 times longer than standard semi-chisel chain, which makes it great for abrasive conditions like cutting creosote treated poles, paper rolls, railroad ties, demolition work, frozen logs and sawing in sand impregnated bark. This chain also has reduced kickback and low vibration features. Please note that there is no warranty on this chain, and this type of carbide will break and chip if impacted by hard objects.
  • Length
    16" (40cm)
  • Pitch
    .325"
  • Gauge
    .050" (1.3mm)
  • Chain Size
    66 Drive Links
  • Drive Link Count
    66 Drive Links
  • Cutter Type
    Carbide
    • Sequence Standard Carbide
    Recommended Diamond Grinding Wheel Size 3.0mm (1/8")
    Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
    Recommended Bar Lengths 16"-20"(40-50cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 23RD
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
  • Length
    16" (40cm)
  • Pitch
    .325"
  • Gauge
    .050" (1.3mm)
  • Chain Size
    66 Drive Links
  • Drive Link Count
    66 Drive Links
  • Cutter Type
    Carbide
    • Sequence Standard Carbide
    Recommended Diamond Grinding Wheel Size 3.0mm (1/8")
    Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
    Recommended Bar Lengths 16"-20"(40-50cm)
    Kickback Reduction Features Single-Humped Drive Link
    Replaces Stihl Part Number 23RD
    WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.
This Item Fits the Following:

Dolmar PS-5100, PS- 5100 S (.325" Pitch), PS-5105, PS-5105 H (.325" Pitch), PS-510 (.325" Pitch), PS-460 (.325" Pitch), PS-6100 (.325" Pitch)
Efco 147, 152, 962, 156 (.325" Pitch)
Fairmount Hydraulic 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, Limblopper
Hitachi CS40EA
Homelite 130, 150, 290, 300, 340, 150A0, CS50, d3350b
Husqvarna 33, 444, 140, 133, 137, 136, 142, 141, 260, 154, 238, 234, 261, 235, 240, 246, 242, 257, 254, 262 XP, 336, 340, 345, 346 XP, 350, 353, 351, 36, 38, 40, 41, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 545, 550 XP, 339 XP, 543 XP
JohnDeere CS46, CS52, CS56, CS62
Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 450, 451, 490, 510, 521, 525, 535, 590, 941, 2036 (.325 Pitch), 2040 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2050 (.325 Pitch), 2149 (.325 Pitch), CS 2153 (.325 Pitch), 435, 440 (.325 Pitch), 520SP, CS 2152 (.325 Pitch), 2045 (.325 Pitch), 2145 (.325 Pitch), 2141 (.325 Pitch), 2041 (.325 Pitch), CS 2040 (.325 Pitch), CS 2150 (.325 Pitch), CS 2147 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch)
Makita DCS430, DCS431, DCS520i, DCS6000i
Maruyama D176-PL11, D176-PS11
McCulloch 46, 4700, 4900, 5000, 5500, 2046AV, 2049AV, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20
Olympyk
(Oleo‑Mac)		 941, 945, 950, 951
Partner 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325)
Pioneer 1074, P-21, P-26, P-28
Poulan/PoulanPRO 325, 525, 235, 240 (.325 Pitch), S35
RedMax G390, G450AVS, G455AVS
Sears/Craftsman 35084, 35201
Shindawa (SDK) 5000
Solo 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch), 651SP
Stanley CS05, CS06
Tanaka ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EA
Troy Bilt TB4620, TB4920, TB5018, TB5020
Echo CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch)

Subscribe to our newsletter now for the latest news and special offers