Fiskars 10

Fiskars 10" (250mm) Powertooth Softgrip Folding Saw

Silky Gomtaro 12

Silky Gomtaro 12" (300mm) Straight Pruning Saw

Samurai Ichiban 13" (330mm) Curved Pruning Saw & Scabbard

SKU
GC 330LH
Professional pruning saw from Samurai. When we first tested these saws, we thought the wood was rotted! The Samurai Ichiban 13" pruning saw is the latest design in handsaws. Saw is incredibly smooth and allows you precise cutting. Samurai saw blades are taper ground and thinner so they cut faster and easier. The impulse hardened, permanently filed teeth are incredibly durable. The legendary sharpness of Samurai saws is achieved by using a whetstone and then chrome plating to reduce friction during use. Features an ergonomic handle that's covered with a rubber cushion for a comfortable, non-slip and positive grip.

Includes a hard plastic scabbard that has a detachable 1" wide woven nylon belt loop.

was $59.99 Now $49.99
Shipping Weight 2.0 lbs.

In stock
Rating:
100% of 100

Replacement Blade is available - #GC 331LH
  • Tooth Profile: The two common blade profiles are "tapered" and "non tapered." The tapered blade is thicker at the bottom where the teeth are and thinner at the top following edge. On a tapered blade the teeth do not have "set" (pushed left and right) therefore the blade following the teeth must be thinner to prevent drag in the saw kerf. A non-tapered blade has the same thickness from the top to the bottom. The teeth on a non-tapered blade have "set" to create a wider kerf at the teeth so the remaining blade can follow through the cut without drag. Typically a "non tapered" blade is more rigid than the tapered blade. Tooth Style: The three sided or tri-edge tooth has edges on both sides and across the top of the tooth. This style tooth cuts much faster then the conventional two sided tooth. The advantage of the conventional two sided tooth is it is easier to sharpen. Teeth/inch Teeth per inches refers to the number of saw teeth in one running inch of saw blade. The smaller the number of teeth per inch the "coarser" the blades is. A blade with a higher number of teeth per inch is described as a fine tooth blade.
  • Hardening: Impulse hardening is the most common method for hardening saw teeth. The process involves using electrical impulses to create a very hard layer on the saw tooth edge. The advantage of impulse hardening is a much longer tooth life. The disadvantage to of an impulse hardened tooth is it cannot be sharpened.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account