Rapco 22" Carbide Chain Loop (A1EP-H-RF 76 Drive Links) Hard Chamfer
SKU
RCL A1EPHRF76
Professional burl cutters, fire departments and pulp mills have relied on Rapco carbide chain for years. Rapco chamfered carbide chain is made by grinding a portion of standard saw chain away and silver soldering a solid chip of carbide back on. The carbide chip is then reshaped to match the original design. The result is a saw chain that can last exceptionally long in abrasive conditions. Rapco chamfered carbide chain is recommended for cutting creosote treated poles, paper rolls, railroad ties, demolition work, frozen logs and sawing in sand impregnated bark. Cutting speed is significantly reduced when using this chain. Use a diamond grinding stone or wheel to sharpen. Please note that there is no warranty on this chain, and this type of carbide will break and chip if impacted by hard objects.
$149.99
| Length | 22" (55cm) |
|---|---|
| Pitch | 3/8" (.375") |
| Gauge | .050" (1.3mm) |
| Drive Link Count | 76 Drive Links |
| Cutter Type | Carbide |
|
Sequence Standard (Semi-Chisel) Carbide Type Hard Cutter Grind Round Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc) Recommended Bar Lengths 12"-36"(30-90cm) Kickback Reduction Features None ANSI Approved Low Kickback Chain No |
| WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available. |
|
This Item Fits the Following:
|
Write Your Own Review