Item # RCL A1EPHRF72
Rapco 20" Carbide Saw Chain Loop (A1EP-H-RF 72 Drive Links) Hard Chamfer
$139.99
In Stock
Professional burl cutters, fire departments and pulp mills have relied on Rapco carbide chain for years. Rapco chamfered carbide chain is made by grinding a portion of standard saw chain away and silver soldering a solid chip of carbide back on. The carbide chip is then reshaped to match the original design. The result is a saw chain that can last exceptionally long in abrasive conditions. Rapco chamfered carbide chain is recommended for cutting creosote treated poles, paper rolls, railroad ties, demolition work, frozen logs and sawing in sand impregnated bark. Cutting speed is significantly reduced when using this chain. Use a diamond grinding stone or wheel to sharpen. Please note that there is no warranty on this chain, and this type of carbide will break and chip if impacted by hard objects.
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeCarbide
Sequence Standard (Semi-Chisel)
Carbide Type Hard
Cutter Grind Round
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Carbide Type Hard
Cutter Grind Round
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeCarbide
Sequence Standard (Semi-Chisel)
Carbide Type Hard
Cutter Grind Round
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Carbide Type Hard
Cutter Grind Round
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| CubCadet | CS5018, CS5220, CS5720 |
| Dolmar | 109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch) |
| Dolmar | PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F |
| Efco | 156 (.375 Pitch), 165 |
| Efco | 181 (After Aug 07), MT 7200, MT 8200 |
| Fairmount Hydraulic | HCS816, HCS820, HCS824 |
| Homelite | 30 |
| Husqvarna | 260, 261, 257, 254, 262 XP, 346 XP, 357 XP, 359, 362 (8.2mm Studs), 455, 455 Rancher, 55, 55 Rancher, 555, 560, 460, 460 Rancher |
| Husqvarna | 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher |
| Jonsered | 2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch) |
| Jonsered | 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186 |
| Makita | DCS 510, DCS460, EA5000P |
| Makita | DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL |
| McCulloch | 555 |
| Partner | 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65 |
| Poulan/PoulanPRO | 425, 445, 475, 505, PRO415 |
| Poulan/PoulanPRO | 5020AV Poulan Pro |
| Shindawa (SDK) | 550, 575, 577, 680, 695, 757 |
| Solo | 603, 662, 665, 667, 670, 675, 680, 681, 690, 694 |
| Stihl | 024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660 |
| Alpina/Castor | A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600 |
| Solo | 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch) |