Oregon Drive Sprocket Needle Cage Bearing (12x16x24) 37514

Oregon Drive Sprocket Needle Cage Bearing (12x16x24) 37514

Oregon Spur Sprocket (.325

Oregon Spur Sprocket (.325" x 7 Tooth) for Jonsered 2045, 2050 and Husqvarna 40

Oregon Power Mate Rim Sprocket (3/8" x 7 Tooth) Standard Spline 68210

ORF 68210
Oregon Power Mate rim sprockets for chainsaws. Rims float on the splined hub of the drum and move side to side, allowing the chain and rim to align with the bar as the chain travels around the bar"s groove. The rim gets most of the sprockets wear, and by being replaceable, it extends the overall life and value of the sprocket system. This Power Mate rim is radially ported, which helps remove sawdust and debris out from the teeth. This rim also has wear depth indicators which tell you when to replace your rim. Standard splined rims have an inside sprocket bore of approximately 7/8".
Shipping Weight 0.2 lbs.

In stock
Rim Specifications:
  • Pitch .375" (3/8")
  • Teeth 7
  • Spline Size Standard 7 Spline (SD7)*
  • Bore 22.25mm (7/8")
  • Diameter 35mm (1-3/8")
  • Replaces Stihl part number 0000 642 1223
  • Replaces Husqvarna/Jonsered part number 501 59 80 02
  • Important Note *SD7 Standard 7 Spline Rims have an interior diameter of approximately 7/8" (less the splines) and will only fit clutch drums with that diameter bore. Please check before ordering.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account