Item # ORF 95TXL072G
Oregon 18" Narrow Kerf Chainsaw Chain Loop (95TXL 72 Drive Links) 95TXL072G
$25.99
In Stock
Oregon 95TXL chain is part of the SpeedCut narrow kerf cutting system. This chain makes a thinner cut than standard .325" pitch saw chain, so it requires less power from your chainsaw. The Micro Chisel cutters have great stay sharp features, while still giving you fast cutting speeds. The patented chain steel OSC-01 provides greater durability especially in cold cutting conditions. 95TXL chainsaw chain has the LubriTec oiling system to help keep both the bar and chain well lubricated. Each blued cutter has expanded top plate indicators for easy filing. Sharpens with a 3/16" round file or 1/8" grinding wheel. 95TXL will not perform well unless used in conjunction with a narrow kerf bar.
- Length18" (45cm)
- Pitch.325"
- Gauge.050" (1.3mm) Narrow Kerf
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard (Full Comp)
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features Bumper Drive Link
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features Bumper Drive Link
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length18" (45cm)
- Pitch.325"
- Gauge.050" (1.3mm) Narrow Kerf
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeSemi-Chisel
Sequence Standard (Full Comp)
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features Bumper Drive Link
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 2.0-3.2 cubic inches (38-55cc)
Recommended Bar Lengths 13"-20" (32-50cm)
Kickback Reduction Features Bumper Drive Link
ANSI Approved Low Kickback Chain No
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| Dolmar | PS-5100, PS- 5100 S (.325" Pitch), PS-5105, PS-5105 H (.325" Pitch), PS-510 (.325" Pitch), PS-460 (.325" Pitch), PS-6100 (.325" Pitch) |
| Efco | 147, 152, 962, 156 (.325" Pitch) |
| Fairmount Hydraulic | 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, Limblopper |
| Hitachi | CS40EA |
| Homelite | 130, 150, 290, 300, 340, 150A0, CS50, d3350b |
| Husqvarna | 33, 444, 140, 133, 137, 136, 142, 141, 260, 154, 238, 234, 261, 235, 240, 246, 242, 257, 254, 262 XP, 336, 340, 345, 346 XP, 350, 353, 351, 36, 38, 40, 41, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 545, 550 XP, 339 XP, 543 XP |
| JohnDeere | CS46, CS52, CS56, CS62 |
| Jonsered | 45, 49, 50, 51, 52, 370, 410, 420, 425, 450, 451, 490, 510, 521, 525, 535, 590, 941, 2036 (.325 Pitch), 2040 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2050 (.325 Pitch), 2149 (.325 Pitch), CS 2153 (.325 Pitch), 435, 440 (.325 Pitch), 520SP, CS 2152 (.325 Pitch), 2045 (.325 Pitch), 2145 (.325 Pitch), 2141 (.325 Pitch), 2041 (.325 Pitch), CS 2040 (.325 Pitch), CS 2150 (.325 Pitch), CS 2147 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch) |
| Makita | DCS430, DCS431, DCS520i, DCS6000i |
| Maruyama | D176-PL11, D176-PS11 |
| McCulloch | 46, 4700, 4900, 5000, 5500, 2046AV, 2049AV, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20 |
| Olympyk (Oleo‑Mac) | 941, 945, 950, 951 |
| Partner | 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325) |
| Pioneer | 1074, P-21, P-26, P-28 |
| Poulan/PoulanPRO | 325, 525, 235, 240 (.325 Pitch), S35 |
| RedMax | G390, G450AVS, G455AVS |
| Sears/Craftsman | 35084, 35201 |
| Shindawa (SDK) | 5000 |
| Solo | 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch), 651SP |
| Stanley | CS05, CS06 |
| Tanaka | ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EA |
| Troy Bilt | TB4620, TB4920, TB5018, TB5020 |
| Echo | CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch) |