Item # ORF 168ATMK095
Oregon 16" DuraCut Hardnose Chainsaw Bar (60 Drive Links) 168ATMK095
$61.99
Oregon DuraCut professional chainsaw bars are built for full-time work in tough, abrasive conditions that would quickly ruin bearings of sprocket-nose bars. Ultra-high-strength, wear resistant alloy is laser welded to the nose for long bar life. These bars come with LubriTec oiling technology, designed to reduce oil-hole plugging and enhance bar-chain lubrication. Laser welding provides the optimum stellite bond without weakening the bar body, as can occur with gas welding. Super-tough chrome-moly steel provides superior bar-body strength and tough rails with excellent resistance to wear and chipping. Oregon DuraCut bars have replaced the Oregon Armor Tip line and logo,but the bars are essentially the same. Older stock may still have the Armor Tip logo.
- Length16" (40cm)
- Gauge.058" (1.5mm)
- Drive Link Count60 Drive Links
- Bar MountK095
Weight 2.5 lbs (1.13kg)
Recommended Chainsaw Size 3.5 cu.in (58cc) and Larger
WARNING: All harvester chain is intended for use on mechanized harvesting equipment only and should never be used on hand-held chainsaws. Depth-gauge settings, grind angles and other features on harvester chain is more aggressive in order to obtain maximum productivity from mechanized saws; these features can cause high levels of kickback, or increase other risk factors which can lead to a greater danger of injury to the operator or bystanders. DO NOT install harvester chain on hand-held chainsaws.
Recommended Chainsaw Size 3.5 cu.in (58cc) and Larger
WARNING: All harvester chain is intended for use on mechanized harvesting equipment only and should never be used on hand-held chainsaws. Depth-gauge settings, grind angles and other features on harvester chain is more aggressive in order to obtain maximum productivity from mechanized saws; these features can cause high levels of kickback, or increase other risk factors which can lead to a greater danger of injury to the operator or bystanders. DO NOT install harvester chain on hand-held chainsaws.
Specs
- Length16" (40cm)
- Gauge.058" (1.5mm)
- Drive Link Count60 Drive Links
- Bar MountK095
Weight 2.5 lbs (1.13kg)
Recommended Chainsaw Size 3.5 cu.in (58cc) and Larger
WARNING: All harvester chain is intended for use on mechanized harvesting equipment only and should never be used on hand-held chainsaws. Depth-gauge settings, grind angles and other features on harvester chain is more aggressive in order to obtain maximum productivity from mechanized saws; these features can cause high levels of kickback, or increase other risk factors which can lead to a greater danger of injury to the operator or bystanders. DO NOT install harvester chain on hand-held chainsaws.
Recommended Chainsaw Size 3.5 cu.in (58cc) and Larger
WARNING: All harvester chain is intended for use on mechanized harvesting equipment only and should never be used on hand-held chainsaws. Depth-gauge settings, grind angles and other features on harvester chain is more aggressive in order to obtain maximum productivity from mechanized saws; these features can cause high levels of kickback, or increase other risk factors which can lead to a greater danger of injury to the operator or bystanders. DO NOT install harvester chain on hand-held chainsaws.
Fitment
This Item Fits the Following:
| Alpina/Castor | A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600 |
| CubCadet | CS5018, CS5220, CS5720 |
| Dolmar | 109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch) |
| Efco | 156 (.375 Pitch), 165 |
| Fairmount Hydraulic | HCS816, HCS820, HCS824 |
| Homelite | 30 |
| Husqvarna | 444, 140, 133, 260, 154, 238, 234, 261, 246, 242, 257, 254, 262 XP, 340, 345, 346 XP, 350, 353, 351, 357 XP, 359, 362 (8.2mm Studs), 38, 40, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 460, 460 Rancher, 545, 550 XP, 543 XP |
| Jonsered | 2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch) |
| Makita | DCS 510, DCS460, EA5000P |
| McCulloch | 555 |
| Poulan/PoulanPRO | 5020AV Poulan Pro |
| Solo | 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch) |