Logosol MF30 Universal Shaper (1-Phase 220V)

Logosol MF30 Universal Shaper (1-Phase 220V)

Logosol SH410 Resaw/Moulder (1-Phase 220V) Fixed Feed

LSL 7504 001 0015
The Logosol SH410 is a unique machine that rips and planes in one pass. The possibility of resawing and moulding in one single operation has solved a lot of problems and saved many working hours. Originally, the machine was built for dimensioning of planks and boards in one pass. The timber gets planed to the set thickness at the same time as it gets resawn to the right width. This function is spot on and feels indispensable in all building projects once you have got used to it. Plastic sheets on the machine table enable you to machine both dry and wet wood without any problems with feeding it through. The machine can also be used as a resaw without the planing function. The Soloplaner has attracted much attention from the building trade, since it eliminates the operation that causes most serious hand injuries at construction sites, namely the use of a resaw. When using the Soloplaner, the workpiece is quickly and safely fed through the machine and is with accuracy resawn into the set dimensions. Use the full potential of the machine and fit moulding knives in the cutter head. You can resaw, square, plane and mould at the same time! Examples of products that can be made in one single operation are quarter rounds, floor decking and some mouldings. More advanced mouldings like panelling or crown mouldings can require two or more goes through the machine. You can even produce wide floor boards with tongue and groove! The machine is built around a sturdy cast iron table that is suspended by trapezoidal bars in the steel chassis, which stands firmly on the ground. A 4 kW motor runs both the cutter head and the circular sawblade. The feeder is run by a separate motor with bevel gear. The heavy design with vibration absorbing cast iron ensures accurate resawing and a perfect planing result. The machine is ready to use in its basic design, the circular sawblade and the planing knives are fitted and set so you can quickly get started with your production, but there are already a number of accessories for the machine. Extra side stops and extension tables for the in- and out-feed side, adjustable feeding speed and, of course, hundreds of moulding knives to choose from. SH410 can take upper cutter knives with 20 mm protrusion, exactly like our largest planer/moulder Logosol PH360! This machine has an adjustable feed rate of 7-39ft per minute. All machines have been test run before shipping. Made in Sweden.
Heavy item - Please call 1-800-322-4539 for a shipping quote.
Shipping Weight 500.0 lbs.

Please contact our Industrial Sales Group at 1-888-465-8227 for ordering and shipping information.

  • Planing Width: 16-3/16" (410mm)
  • Planing Height: 9-14/16" (250mm)
  • Resawing Height: 3" (75mm)
  • Moulding Depth: 9" (230mm)
  • Feed Rate: 19 ft/min (6 m/min)
  • Rotation Speed: 6000 rpm
  • Electrical Connection: 1-phase 230 Volts 16 Amps
  • Total Continuous Output: 4.3hp (3.2kW)
  • Weight: 430 lbs. (195 kg)
  • Accessories: Extension table chip set-up moulding knives etc.
All motors are equipped with overheating protection.

2 Year Warranty
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account