Logosol PH260 4-Head Planer/Moulder (1-Phase 220V) M4

Logosol PH260 4-Head Planer/Moulder (1-Phase 220V) M4

Logosol PH360 4-Head Planer/Moulder (3-Phase 440V)

Logosol PH360 4-Head Planer/Moulder (3-Phase 440V)

Logosol PH365 5-Head Planer/Moulder (3-Phase 220V)

SKU
LSL 7537 000 0020
The PH365 is the first 5 head planer/moulder available from Logosol. The PH365 allows you to mould deep and complex profiles that traditional 4-head moulders struggle with. The PH365 is built just like the PH360 moulder, but is also equipped with a unique 5th cutterhead. The 5th cutterhead gives you completely new possibilities, including deep profiles, brushes and even sanding rollers for an extra fine surface finish. The 5th cutterhead can be tilted up to 270 degrees, which allows you to machine the workpiece from below, from the side or from above. Just like the PH360, the five-cutter planer/molder can manage four-sided machining up to 360 x 130 mm (14" x 5"). When planing two sides it manage fully 410 mm (16"). It is built like an industrial planer/molder, but with fixed machine table of cast iron that enables it to be integrated in a production line. Like all Logosol planer/moulders, you can change profiles quickly and efficently, even for short runs.It normally takes about 20 minutes to reset the machine from one pattern to another. Logosol has a catalog with over 500 different moulding knives to choose from. Made in Sweden.All machines have been test run before shipping.
Heavy item - Please call 1-888-465-8227 for a shipping quote.
Shipping Weight 1,400.0 lbs.

Please contact our Industrial Sales Group at 1-888-465-8227 for ordering and shipping information.

  • Maximum Planing Dimensions
    4-sided Planing
    Maximum Width: 14" (360 mm)
    Maximum Height: 5" (130mm)
    2-Sided Planing
    Maximum Width: 16" (410mm)
    Maximum Height: 9" (230mm)
    1-Sided Planing
    Maximum Width: 20" (510mm)
    Maximum Height: 9" (230mm)
  • Top HorizontalCutter Specs
    Diameter: 3.46" (88mm)
    Width: 20" (510mm)
    Motor Output: 7.5hp (5.5kW)
    Rotational speed: 7,000 rpm
    Maximum Cutting Depth when Planing: 5/16" (8mm)
    Maximum Cutting Depth when Moulding: 3/4" (20mm)
  • Bottom Horizontal Cutter Specs
    Diameter: 2.83" (72mm)
    Width: 16" (410mm)
    Motor Output: 5.5hp (4kW)
    Rotational speed: 7,000 rpm
    Maximum Cutting Depth when Planing: 5/16" (8mm)
    Maximum Cutting Depth when Moulding: 3/8" (10mm)
  • Side Cutter Specs
    Spindle Axle Diameter: 1-3/16" (30mm)
    Spindle Height: 5" (130mm)
    Maximum Cutter Diameter: 5.5" (140mm)
    Motor Output: 4hp (3kW)
    Rotational Speed: 7,000 rpm
    Maximum Cutting Depth: 1-1/8" (30mm)
    • 5th Cutterhead Specs
      Quantity: 1
      Adjustable Angle: 270 Degrees
      Spindle Diameter: 30mm
      Output: 4hp (3kW)
      Rotational Speed: 7,000 RPM
    • Vertical Cutterhead Specs
      Quantity: 2
      Type: TB90 (2-knife)
      Body Diameter: 3.46" (88mm)
      Body Height: 1-1/2" (40mm)
      Cutter Type: 50mm HSS Planer Knives
    • Feed System Specs
      Output: 1hp (0.75kW)
      Std Feed rate: 11-52 ft/min (3-15 m/min)
      Optional Feed rate: 20-98 ft/min (6-30 m/min)
    • Electrical System
      Total output: 26hp (19.25kW)
      All motors are equipped with overheating protection.
      Electrical Connection: 3-phase, 220 Volts, 60hz, 63 Amps
    • Dimensions and Weight
      Length and Width: 144" X 45" (3,660mm x 1,125mm)
      Height: 56" (1,430mm)
      Weight: 2,200 lbs (1,000kg)

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account