Logosol PH365 5-Head Planer/Moulder (3-Phase 440V)

Logosol PH365 5-Head Planer/Moulder (3-Phase 440V)

Logosol PH260 4-Head Planer/Moulder (3-Phase 220V) M4

LSL 7514 000 0025
The Logosol PH260 is the worlds most popular entry level 4-head planer/moulder. Thousands of machines are running daily, producing flooring, paneling and mouldings from rough sawn lumber. Logosol PH260 planes and moulds all four sides in one pass. You can quickly and easily produce a huge array of common products such as flooring, V-groove paneling, baseboards, crown moulding as well as hundred of custom-made mouldings. Reseting the cutters is quick and easy, making the PH260 perfect for short customized runs. The PH260 variable feed rate allows you to produce a finish as good most industrial machines costing tens or hundreds of thousands dollars more. The only difference is more expensive machines have a faster feed rates. With PH260 you can feed up to 40 linear feet per minute. The PH260 is built for continuous industrial operation. Thermoguards prevent each of the five electric motors from being overloaded. The cutters can handle sizeable depths. This makes it possible to cut deep and beautiful patterns. PH260 also has a remarkable capacity when it comes to poorly sawn lumber. The upper cutter can plane to a depth of 3/8'' (8 mm), plus the moulding depth, in one single operation, and the side cutters can cut even more. In/Out feeder trays (shown) and castors are optional equipment. Made in Sweden.
Shipping Weight 900.0 lbs.

Please contact our Industrial Sales Group at 1-888-465-8227 for ordering and shipping information.

  • 4-sided Planing/Molding
    Width: 15-260 mm (5/8-10 1/4")
    Height: 10-100 mm (7/16-3 15/16")
  • 2-sided Planing/Molding
    Width: Up to 300 mm (11 7/8")
    Height: 10-230 mm (7/16-9")
  • Upper Cutter Planing/Molding
    Width: Up to 410 mm (16 3/16")
    Height: 10-230 mm (7/16"-9")
  • Upper Horizontal Cutter
    Diameter: 72 mm (2 7/8")
    Width: 410 mm (16 3/16")
    Continuous output: 4 kW (5 HP)
    Number of rev.: 6000 rpm (50 Hz) and 7000 rpm (60 Hz)
    Max. planing depth: 8 mm (3/8")
    Max. molding depth: 20 mm (3/4")
  • Lower Horizontal Cutter
    Diameter: 72 mm (2 7/8")
    Width: 300 mm (11 7/8")
    Continuous output: 3 kW (4 HP)
    Number of rev.: 6000 rpm (50 Hz) and 7000 rpm (60 Hz)
    Planing depth: 0-4 mm (0-3/16")
    Max. molding depth: 5 mm (1/4")
  • Side Cutters
    Spindle axle diameter: 30 mm (1 3/16")
    Max. cutter height: 100 mm (3 15/16")
    Max. cutter diameter: 140 mm (5 9/16")
    Continuous output: 3 kW (4 HP)
    Number of rev.: 7000 rpm
    Max. cutting depth: 30 mm (1 3/16")
    Only with properly sized tooling.
  • Included Side Cutter Heads and Knives
    Two TB90 side cutter heads and four 50 mm (2") wide planing knives included.
    Cutter diameter: 90 mm (3 9/16")
    Cutter height: 40 mm (1 5/8")
  • Feed System
    Feed rollers: 5 feed rollers - 4 metal 1 Polyurethane
    Transmission: Chain driven direct drive with variable feeding speed.
    Feeding speed: Standard: 7-39 ft/min
    Continuous output: 0.18 kW (0.25 HP)
  • Electric System
    Moisture protected IP54
    Total continuous output: 13.2 kW (17.3 HP)
  • Electricity supply:
    Three Phase: 220 Volt, 60 Hz, 50 A
    Also available in Single Phase: 220 Volt, 60 Hz, 50 A
  • Size and Weight
    Length: 1100 mm (43")
    Width: 900 mm (35")
    Height: 970 mm (38")
    Weight: 350 kg (772 lbs)

2 Year Warranty
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account