Item # FR8
Labonville Fire Resistant Apron Chainsaw Chaps FR8
$149.99 - $179.99
Professional chainsaw protection chaps from Labonville. Labonville has been making chainsaw chaps in the U.S.A. since the mid 60's, and they have set the bar for quality and innovation. Labonville fire resistant apron chaps are designed to reduce the risk or severity of injury to your front leg area in the case of a cutting mishap. These chaps have a 1000 Denier covering on both sides, with 5 layers of DuPont Kevlar and polyester blend for the pad. They also include a layer of special Fire Resistant material under the front cordura layer to prevent flames and embers from penetrating into the pad. Chaps come with a 2" adjustable waist belt and 1" adjustable leg straps with quick snap fasteners. Labonville chaps are UL certified to ASTM standards. Designed to hand wash with non-chlorine bleach detergents and hang to dry.
Choose from the sizes and colors below.
Safety Certifications
UL Certified in Accordance with ASTM F1414-13
Meets ASTM F1897-2008 Leg Protection for Chain Saw Users
Meets ASTM D-3787 Flame Resistance Standard
Meets OSHA Regulation 1910-266 for Logging Operations
Meets ANSI Z133.1 2012 Standards for Tree Care Operations
Meets USFS Requirements 11BF
Chap Overall Length Reg (Medium) 32", Long (Large) 36", X-Long (X-Large) 40", 2X-Long (2X-Large) 44"
Pad Overall Length Reg (Medium) 28", Long (Large) 32", X-Long (X-Large) 36", 2X-Long (2X-Large) 40"
Leg Width 15" at the widest point
Adjustable Waist Belt Size 26" to 48" (Extension Available)
Chap Cover Material 1000 Denier Nylon
Chap Cut Resistant Material 6 Layers (Kevlar/Polyester Blend)
Country of Origin U.S.A.
Chainsaw Chap Fitment Information
Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight.
Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws.
UL Certified in Accordance with ASTM F1414-13
Meets ASTM F1897-2008 Leg Protection for Chain Saw Users
Meets ASTM D-3787 Flame Resistance Standard
Meets OSHA Regulation 1910-266 for Logging Operations
Meets ANSI Z133.1 2012 Standards for Tree Care Operations
Meets USFS Requirements 11BF
Chap Overall Length Reg (Medium) 32", Long (Large) 36", X-Long (X-Large) 40", 2X-Long (2X-Large) 44"
Pad Overall Length Reg (Medium) 28", Long (Large) 32", X-Long (X-Large) 36", 2X-Long (2X-Large) 40"
Leg Width 15" at the widest point
Adjustable Waist Belt Size 26" to 48" (Extension Available)
Chap Cover Material 1000 Denier Nylon
Chap Cut Resistant Material 6 Layers (Kevlar/Polyester Blend)
Country of Origin U.S.A.
Chainsaw Chap Fitment Information
Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight.
Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws.
Specs
Safety Certifications
UL Certified in Accordance with ASTM F1414-13
Meets ASTM F1897-2008 Leg Protection for Chain Saw Users
Meets ASTM D-3787 Flame Resistance Standard
Meets OSHA Regulation 1910-266 for Logging Operations
Meets ANSI Z133.1 2012 Standards for Tree Care Operations
Meets USFS Requirements 11BF
Chap Overall Length Reg (Medium) 32", Long (Large) 36", X-Long (X-Large) 40", 2X-Long (2X-Large) 44"
Pad Overall Length Reg (Medium) 28", Long (Large) 32", X-Long (X-Large) 36", 2X-Long (2X-Large) 40"
Leg Width 15" at the widest point
Adjustable Waist Belt Size 26" to 48" (Extension Available)
Chap Cover Material 1000 Denier Nylon
Chap Cut Resistant Material 6 Layers (Kevlar/Polyester Blend)
Country of Origin U.S.A.
Chainsaw Chap Fitment Information
Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight.
Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws.
UL Certified in Accordance with ASTM F1414-13
Meets ASTM F1897-2008 Leg Protection for Chain Saw Users
Meets ASTM D-3787 Flame Resistance Standard
Meets OSHA Regulation 1910-266 for Logging Operations
Meets ANSI Z133.1 2012 Standards for Tree Care Operations
Meets USFS Requirements 11BF
Chap Overall Length Reg (Medium) 32", Long (Large) 36", X-Long (X-Large) 40", 2X-Long (2X-Large) 44"
Pad Overall Length Reg (Medium) 28", Long (Large) 32", X-Long (X-Large) 36", 2X-Long (2X-Large) 40"
Leg Width 15" at the widest point
Adjustable Waist Belt Size 26" to 48" (Extension Available)
Chap Cover Material 1000 Denier Nylon
Chap Cut Resistant Material 6 Layers (Kevlar/Polyester Blend)
Country of Origin U.S.A.
Chainsaw Chap Fitment Information
Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight.
Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws.
Manuals