Item # ICS 6
ICS Gas Powered Concrete Chainsaws
$1,699.99 - $2,599.99
ICS has a concrete cutting chainsaw. Just park everything you know about woodcutting chainsaws and take a look at this unit. Looking beyond the 101 cc's of power this is a wet cutting saw that keeps the dust down. That same water also keeps the bar lubed with special water discharge holes in the bar. This saw grinds its way through concrete, masonry, block and stone. Pesky re-bar in the way? No problem there, as this will also cut up to 3/4" re-bar as well.
Their special patented Twin Max diamond chain grinds its way through whatever is standing in your way of progress. Get out of the stone age with that old cut off saw with time wasting over cuts from a circular blade. Make simple deep square plunge cuts with no kick back worries.
Keep in mind that this chainsaw wants to run richer than your woodcutting saw. 25 to 1 mix is required (ICS 505883 - See Related Items, below). You'll also need at least a minimum of 20 PSI for the units water lubrication.
12” Model:
Weight: 21 lbs (9.5 kg) with bar and chain
Bar Length: 12-inch (30 cm), 14-inch (35 cm)
Engine Speed: 11500 +/-500 rpm, 2800-3200 rpm idle
Horsepower: 5.7 hp (4.2 kW) @ 9000 rpm
Engine Type: 2-stroke, single cylinder, air cooled
Displacement: 4.9 cu. Inch (80 cc)
Chain Speed: 5300 fpm (27 m/s), free running
Powerhead size: 18 inches (45 cm) Length, 11.5 inches (29 cm) Height, 10 inches (25 cm) Width
> Noise Level: 100 dB @ 3 ft (1 m)
Vibration Level: 10.5 meters/second2 (front handle)
Water Supply: Minimum 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.23 gal (.88 liter)
Run time per tank: 15-18 minutes
14” Model:
Weight: 27.5 lbs (12.5 kg) with bar and chain
Recommended Bar Length: Up to 16 in (40 cm)
Engine Speed: 11500 +/- 500 rpm, 2500-2800 rpm idle
Horsepower: 6.5 hp (4.8 kW) @ 8700 rpm
Engine type: 2-stroke, single cylinder, air cooled
Displacement: 6.2 cu in (101 cc)
Chain Speed: 4950 fpm (25 m/s), free running
Powerhead Size: 23 in (58 cm) length, 14 in (35 cm) height, 12 in (30 cm) width
Noise Level: 102 dB @ 3 ft (1 m)
Vibration Level: 8 meters/second2 (front handle)
Water Supply Minimum: 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.26 gallon (1 liter)
Run time per tank: 12-15 minutes
Weight: 21 lbs (9.5 kg) with bar and chain
Bar Length: 12-inch (30 cm), 14-inch (35 cm)
Engine Speed: 11500 +/-500 rpm, 2800-3200 rpm idle
Horsepower: 5.7 hp (4.2 kW) @ 9000 rpm
Engine Type: 2-stroke, single cylinder, air cooled
Displacement: 4.9 cu. Inch (80 cc)
Chain Speed: 5300 fpm (27 m/s), free running
Powerhead size: 18 inches (45 cm) Length, 11.5 inches (29 cm) Height, 10 inches (25 cm) Width
> Noise Level: 100 dB @ 3 ft (1 m)
Vibration Level: 10.5 meters/second2 (front handle)
Water Supply: Minimum 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.23 gal (.88 liter)
Run time per tank: 15-18 minutes
14” Model:
Weight: 27.5 lbs (12.5 kg) with bar and chain
Recommended Bar Length: Up to 16 in (40 cm)
Engine Speed: 11500 +/- 500 rpm, 2500-2800 rpm idle
Horsepower: 6.5 hp (4.8 kW) @ 8700 rpm
Engine type: 2-stroke, single cylinder, air cooled
Displacement: 6.2 cu in (101 cc)
Chain Speed: 4950 fpm (25 m/s), free running
Powerhead Size: 23 in (58 cm) length, 14 in (35 cm) height, 12 in (30 cm) width
Noise Level: 102 dB @ 3 ft (1 m)
Vibration Level: 8 meters/second2 (front handle)
Water Supply Minimum: 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.26 gallon (1 liter)
Run time per tank: 12-15 minutes
Specs
12” Model:
Weight: 21 lbs (9.5 kg) with bar and chain
Bar Length: 12-inch (30 cm), 14-inch (35 cm)
Engine Speed: 11500 +/-500 rpm, 2800-3200 rpm idle
Horsepower: 5.7 hp (4.2 kW) @ 9000 rpm
Engine Type: 2-stroke, single cylinder, air cooled
Displacement: 4.9 cu. Inch (80 cc)
Chain Speed: 5300 fpm (27 m/s), free running
Powerhead size: 18 inches (45 cm) Length, 11.5 inches (29 cm) Height, 10 inches (25 cm) Width
> Noise Level: 100 dB @ 3 ft (1 m)
Vibration Level: 10.5 meters/second2 (front handle)
Water Supply: Minimum 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.23 gal (.88 liter)
Run time per tank: 15-18 minutes
14” Model:
Weight: 27.5 lbs (12.5 kg) with bar and chain
Recommended Bar Length: Up to 16 in (40 cm)
Engine Speed: 11500 +/- 500 rpm, 2500-2800 rpm idle
Horsepower: 6.5 hp (4.8 kW) @ 8700 rpm
Engine type: 2-stroke, single cylinder, air cooled
Displacement: 6.2 cu in (101 cc)
Chain Speed: 4950 fpm (25 m/s), free running
Powerhead Size: 23 in (58 cm) length, 14 in (35 cm) height, 12 in (30 cm) width
Noise Level: 102 dB @ 3 ft (1 m)
Vibration Level: 8 meters/second2 (front handle)
Water Supply Minimum: 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.26 gallon (1 liter)
Run time per tank: 12-15 minutes
Weight: 21 lbs (9.5 kg) with bar and chain
Bar Length: 12-inch (30 cm), 14-inch (35 cm)
Engine Speed: 11500 +/-500 rpm, 2800-3200 rpm idle
Horsepower: 5.7 hp (4.2 kW) @ 9000 rpm
Engine Type: 2-stroke, single cylinder, air cooled
Displacement: 4.9 cu. Inch (80 cc)
Chain Speed: 5300 fpm (27 m/s), free running
Powerhead size: 18 inches (45 cm) Length, 11.5 inches (29 cm) Height, 10 inches (25 cm) Width
> Noise Level: 100 dB @ 3 ft (1 m)
Vibration Level: 10.5 meters/second2 (front handle)
Water Supply: Minimum 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.23 gal (.88 liter)
Run time per tank: 15-18 minutes
14” Model:
Weight: 27.5 lbs (12.5 kg) with bar and chain
Recommended Bar Length: Up to 16 in (40 cm)
Engine Speed: 11500 +/- 500 rpm, 2500-2800 rpm idle
Horsepower: 6.5 hp (4.8 kW) @ 8700 rpm
Engine type: 2-stroke, single cylinder, air cooled
Displacement: 6.2 cu in (101 cc)
Chain Speed: 4950 fpm (25 m/s), free running
Powerhead Size: 23 in (58 cm) length, 14 in (35 cm) height, 12 in (30 cm) width
Noise Level: 102 dB @ 3 ft (1 m)
Vibration Level: 8 meters/second2 (front handle)
Water Supply Minimum: 20 psi (1.5 bar)
Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
Fuel Capacity: 0.26 gallon (1 liter)
Run time per tank: 12-15 minutes