• .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
  • .375INKICKBACK_IC.PNG
  • .050INKICKBACK_IC.PNG
Oregon 72CL (3/8

Oregon 72CL (3/8" Pitch) Square Chisel Chainsaw Chain

Husqvarna H83 (3/8

Husqvarna H83 (3/8" Pitch) Square Chisel Skiptooth Chainsaw Chain

Husqvarna H82 (3/8" Pitch) Square Chisel Skiptooth Chainsaw Chain

SKU
HVA H82P
SKU
HVA 501 84 67 91
SKU
HVA 591 13 99 01
SKU
HVA 591 13 99 72
SKU
HVA 591 13 99 84
SKU
HVA 591 13 99 93
SKU
HVA 591 13 99 05
Husqvarna H82 is fastest cutting saw chain made today. When sharpened correctly, no other chain cuts faster and smoother. This chain style is primarily used on the west coast in big softwood timber. Hand filing this chain properly is very difficult to do. Most operators will invest in a chisel grinder and bring freshly ground chains to the job. This chain works best cutting clean wood, and will dull quickly in abrasive conditions. If the sharp point on the cutter becomes dull, the chain quits cutting efficiently. H82 chain sharpens with a double bevel or 3 corner file or chisel grinder (see Silvey chisel chain grinder section)
$27.99 - $499.99
$34.99
$499.99
$27.99
$29.99
$34.99
$37.99

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

Shipping Weight 1.0 lbs.

Special Order Item
Ships in 7-10 Days
Expedited Shipping Unavailable

In stock
 
 
 
 
 
 
More Information
Pitch 3/8" (.375)
Gauge .050" (1.3mm)
Cutter Type Square Chisel Skiptooth
Sequence Skiptooth
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Chain 72CJ
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.


This Item Fits the Following:

Stihl 024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660

This Item Fits the Following:

CubCadetCS5018, CS5220, CS5720
Dolmar109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch)
DolmarPS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco156 (.375 Pitch), 165
Efco181 (After Aug 07), MT 7200, MT 8200
Fairmount HydraulicHCS816, HCS820, HCS824
Homelite30
Husqvarna444, 140, 133, 260, 154, 238, 234, 261, 246, 242, 257, 254, 262 XP, 340, 345, 346 XP, 350, 353, 351, 357 XP, 359, 362 (8.2mm Studs), 38, 40, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 460, 460 Rancher, 545, 550 XP, 543 XP
Husqvarna570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher
Jonsered2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch)
Jonsered625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186
MakitaDCS 510, DCS460, EA5000P
MakitaDCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
McCulloch555
Partner550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO425, 445, 475, 505, PRO415
Poulan/PoulanPRO5020AV Poulan Pro
Shindawa (SDK)550, 575, 577, 680, 695, 757
Solo603, 662, 665, 667, 670, 675, 680, 681, 690, 694
Stihl024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660
Alpina/CastorA-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Solo651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch)

This Item Fits the Following:

CubCadetCS5018, CS5220, CS5720
Dolmar109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch)
DolmarPS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco156 (.375 Pitch), 165
Efco181 (After Aug 07), MT 7200, MT 8200
Fairmount HydraulicHCS816, HCS820, HCS824
Homelite30
Husqvarna444, 140, 133, 260, 154, 238, 234, 261, 246, 242, 257, 254, 262 XP, 340, 345, 346 XP, 350, 353, 351, 357 XP, 359, 362 (8.2mm Studs), 38, 40, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 460, 460 Rancher, 545, 550 XP, 543 XP
Husqvarna570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher
Jonsered2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch)
Jonsered625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186
MakitaDCS 510, DCS460, EA5000P
MakitaDCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
McCulloch555
Partner550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO425, 445, 475, 505, PRO415
Poulan/PoulanPRO5020AV Poulan Pro
Shindawa (SDK)550, 575, 577, 680, 695, 757
Solo603, 662, 665, 667, 670, 675, 680, 681, 690, 694
Stihl024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660
Alpina/CastorA-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Solo651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch)

This Item Fits the Following:

CubCadet CS5018, CS5220, CS5720
Dolmar 109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch)
Dolmar PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco 156 (.375 Pitch), 165
Efco 181 (After Aug 07), MT 7200, MT 8200
Fairmount Hydraulic HCS816, HCS820, HCS824
Homelite 30
Husqvarna 444, 140, 133, 260, 154, 238, 234, 261, 246, 242, 257, 254, 262 XP, 340, 345, 346 XP, 350, 353, 351, 357 XP, 359, 362 (8.2mm Studs), 38, 40, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 460, 460 Rancher, 545, 550 XP, 543 XP
Husqvarna 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher
Jonsered 2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch)
Jonsered 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186
Makita DCS 510, DCS460, EA5000P
Makita DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
McCulloch 555
Partner 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO 425, 445, 475, 505, PRO415
Poulan/PoulanPRO 5020AV Poulan Pro
Shindawa (SDK) 550, 575, 577, 680, 695, 757
Solo 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Solo 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch)

This Item Fits the Following:

Dolmar PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco 181 (After Aug 07), MT 7200, MT 8200
Husqvarna 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher
Jonsered 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186
Makita DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
Partner 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO 425, 445, 475, 505, PRO415
Shindawa (SDK) 550, 575, 577, 680, 695, 757
Solo 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
Stihl 024, 028, 030, 034, 038, 041, 044, 048, MS 291, MS 261, MS 461, MS 460 R, 026, 029, 032, 036, 039, 042, 046, 045, 056, 066, MS 440, MS 390, MS 361, MS 271, MS 640, MS 311, MS 341, MSE 220 Electric, 031, 040, E 15 Electric, 064, E 220 Electric, E 20 Electric, MS 661, MS 260, MS 270, MS 280, MS 290, MS 310, MS 340, MS 360, MS 362, MS 380, MS 391, MS 441, MS 460, MS 650, MS 660

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account