Item # HVF 572XP 20
Husqvarna 572XP (71cc) Chainsaw with 20" Bar & Chain
$1,249.99
In Stock
The Husqvarna 572XP is the replacement chainsaw for the legendary 372XP. At just 14.5 lbs, the 572XP has a better power-to-weight ratio and 12% higher cutting capacity than the 372XP X-Torq. This saw is designed to operate in the world's most rugged environments. Excellent cooling and heavy-duty filtration maximize reliability, while a smart design accommodates longer guide bars. Thanks to AutoTune, Air Injection, and low vibration technology, the 572XP allow you to work all day. New engine design offers a wide usable RPM range for peak performance even under heavy loads. This chainsaw is the standard half wrap version. West coast full wrap versions also available. Only available for sale in the United States.
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Drive Link Count72 Drive Links
Cylinder Displacement 4.3 cu. inch / 70.6cm
Power 5.8 hp
Max Power Speed 9,900 RPM
Fuel Consumption 429 g/kWh
Oil Tank Volume 0.7 US Pint / 0.40 Liter
Idling Speed 2,700 RPM
Spark Plug NGK BPMR7A
Electrode Gap 0.02"
Torque, Max 4.5 Nm
Weight (Powerhead Only) 14.5 lbs / 6.1 kg
Chainsaw Bar 20" X-Tough RSN (72 Drive Links) XTR-380-72
Recommended Bar Lengths 15" - 28"
Features
Low vibrations Husqvarna's anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Soft Cut-Out System The innovative system for engine control is designed for providing a long engine life. The system monitors the engine and assures that the engine always is protected from over-revving.
Visible Fuel Level Transparent fuel indicator makes it easy to check fuel level.
Flip Up Tank Caps Easy to open and secure firmly, even when wearing thick winter gloves.
Better Maneuverability Gives Full Control The front handle bar position is close to the center of gravity, giving you better cutting control.
Air Injection Filters 98% of Incoming Dust Gives you full working days with maintained performance and less wear on the engine.
Better Chip Ejection Avoids Clogging The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long fibre wood.
Felling Sight to Last a Lifetime Perfect sight is critical when felling - so Husqvarna made one that will outlast the chainsaw itself.
Rubber Handle Inlay for Safer Grip The rubber handle provides a firm grip, while still allowing you flexibility while you work.
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Power 5.8 hp
Max Power Speed 9,900 RPM
Fuel Consumption 429 g/kWh
Oil Tank Volume 0.7 US Pint / 0.40 Liter
Idling Speed 2,700 RPM
Spark Plug NGK BPMR7A
Electrode Gap 0.02"
Torque, Max 4.5 Nm
Weight (Powerhead Only) 14.5 lbs / 6.1 kg
Chainsaw Bar 20" X-Tough RSN (72 Drive Links) XTR-380-72
Recommended Bar Lengths 15" - 28"
Features
Low vibrations Husqvarna's anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Soft Cut-Out System The innovative system for engine control is designed for providing a long engine life. The system monitors the engine and assures that the engine always is protected from over-revving.
Visible Fuel Level Transparent fuel indicator makes it easy to check fuel level.
Flip Up Tank Caps Easy to open and secure firmly, even when wearing thick winter gloves.
Better Maneuverability Gives Full Control The front handle bar position is close to the center of gravity, giving you better cutting control.
Air Injection Filters 98% of Incoming Dust Gives you full working days with maintained performance and less wear on the engine.
Better Chip Ejection Avoids Clogging The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long fibre wood.
Felling Sight to Last a Lifetime Perfect sight is critical when felling - so Husqvarna made one that will outlast the chainsaw itself.
Rubber Handle Inlay for Safer Grip The rubber handle provides a firm grip, while still allowing you flexibility while you work.
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.050" (1.3mm)
- Drive Link Count72 Drive Links
Cylinder Displacement 4.3 cu. inch / 70.6cm
Power 5.8 hp
Max Power Speed 9,900 RPM
Fuel Consumption 429 g/kWh
Oil Tank Volume 0.7 US Pint / 0.40 Liter
Idling Speed 2,700 RPM
Spark Plug NGK BPMR7A
Electrode Gap 0.02"
Torque, Max 4.5 Nm
Weight (Powerhead Only) 14.5 lbs / 6.1 kg
Chainsaw Bar 20" X-Tough RSN (72 Drive Links) XTR-380-72
Recommended Bar Lengths 15" - 28"
Features
Low vibrations Husqvarna's anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Soft Cut-Out System The innovative system for engine control is designed for providing a long engine life. The system monitors the engine and assures that the engine always is protected from over-revving.
Visible Fuel Level Transparent fuel indicator makes it easy to check fuel level.
Flip Up Tank Caps Easy to open and secure firmly, even when wearing thick winter gloves.
Better Maneuverability Gives Full Control The front handle bar position is close to the center of gravity, giving you better cutting control.
Air Injection Filters 98% of Incoming Dust Gives you full working days with maintained performance and less wear on the engine.
Better Chip Ejection Avoids Clogging The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long fibre wood.
Felling Sight to Last a Lifetime Perfect sight is critical when felling - so Husqvarna made one that will outlast the chainsaw itself.
Rubber Handle Inlay for Safer Grip The rubber handle provides a firm grip, while still allowing you flexibility while you work.
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Power 5.8 hp
Max Power Speed 9,900 RPM
Fuel Consumption 429 g/kWh
Oil Tank Volume 0.7 US Pint / 0.40 Liter
Idling Speed 2,700 RPM
Spark Plug NGK BPMR7A
Electrode Gap 0.02"
Torque, Max 4.5 Nm
Weight (Powerhead Only) 14.5 lbs / 6.1 kg
Chainsaw Bar 20" X-Tough RSN (72 Drive Links) XTR-380-72
Recommended Bar Lengths 15" - 28"
Features
Low vibrations Husqvarna's anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Soft Cut-Out System The innovative system for engine control is designed for providing a long engine life. The system monitors the engine and assures that the engine always is protected from over-revving.
Visible Fuel Level Transparent fuel indicator makes it easy to check fuel level.
Flip Up Tank Caps Easy to open and secure firmly, even when wearing thick winter gloves.
Better Maneuverability Gives Full Control The front handle bar position is close to the center of gravity, giving you better cutting control.
Air Injection Filters 98% of Incoming Dust Gives you full working days with maintained performance and less wear on the engine.
Better Chip Ejection Avoids Clogging The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long fibre wood.
Felling Sight to Last a Lifetime Perfect sight is critical when felling - so Husqvarna made one that will outlast the chainsaw itself.
Rubber Handle Inlay for Safer Grip The rubber handle provides a firm grip, while still allowing you flexibility while you work.
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.