Item # HVA 581 62 69 72
Husqvarna 20" X-Cut Chainsaw Chain Loop (C85 72 Drive Links) 581626972
$34.99
In Stock
Husqvarna C85 X-Cut Chain is designed for forestry professionals who want an aggressive, fast cutting full chisel chain for quick results. This chain works well when plunge cutting or performing bore cuts on trees. Razor sharp chisel cutters make quick work of both hardwoods and softwoods. C85 works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. The chain is made entirely by Husqvarna to ensure you get the best possible output from your chainsaw. C85 has outstanding durability and cutting efficiency, a sharpness that lasts and low stretch which yields optimum results allowing for less maintenance and lower operating costs. C85 chain sharpens with a 7/32" round file or 3/16" grinding wheel.
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.058" (1.5mm)
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Number 73LGX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Number 73LGX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Specs
- Length20" (50cm)
- Pitch3/8" (.375")
- Gauge.058" (1.5mm)
- Chain Size72 Drive Links
- Drive Link Count72 Drive Links
- Cutter TypeChisel
Sequence Standard
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Number 73LGX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36"(30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Replaces Oregon Part Number 73LGX
WARNING: This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
Fitment
This Item Fits the Following:
| CubCadet | CS5018, CS5220, CS5720 |
| Dolmar | 109, 110, 111, 112, 113, 114, 115, 117, 118, 119, 120, 110 EX, 116 si, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6800, PS-6100 (3/8" Pitch) |
| Dolmar | PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F |
| Efco | 156 (.375 Pitch), 165 |
| Efco | 181 (After Aug 07), MT 7200, MT 8200 |
| Fairmount Hydraulic | HCS816, HCS820, HCS824 |
| Homelite | 30 |
| Husqvarna | 444, 140, 133, 260, 154, 238, 234, 261, 246, 242, 257, 254, 262 XP, 340, 345, 346 XP, 350, 353, 351, 357 XP, 359, 362 (8.2mm Studs), 38, 40, 44, 42, 435, 440, 445, 45, 450, 450 Rancher, 49, 455, 455 Rancher, 50, 51, 55, 55 Rancher, 555, 560, 460, 460 Rancher, 545, 550 XP, 543 XP |
| Husqvarna | 570, 1100 CD, 162, 181, 2100 CD, 2101, 272 XP, 298, 3120 XP, 266 XP, 268, 185, 160, 281, 362 (9mm Studs), 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 365, 480 CD, 70, 562 XP, 575 XP, 66, 77, 65, 576 XP, 61, 285, 288 XP, 465, 465 Rancher |
| Jonsered | 2050 (.375 Pitch), 2149 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2163 (.375 Pitch), 2159 (.375 Pitch), 2150 (.375 Pitch), CS 2150 (.375 Pitch), CS 2147 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch) |
| Jonsered | 625, 630, 670, 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, CS 2188, CS 2166, CS 2172, Ripping Mill, CS 2165, CS 2171, CS 2186 |
| Makita | DCS 510, DCS460, EA5000P |
| Makita | DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL |
| McCulloch | 555 |
| Partner | 550, 650, 1655, 2055, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65 |
| Poulan/PoulanPRO | 425, 445, 475, 505, PRO415 |
| Poulan/PoulanPRO | 5020AV Poulan Pro |
| Shindawa (SDK) | 550, 575, 577, 680, 695, 757 |
| Solo | 603, 662, 665, 667, 670, 675, 680, 681, 690, 694 |
| Alpina/Castor | A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600 |
| Solo | 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch) |