Item # 987 CBA
Greenteeth Pocket (1100 Series Counter Bored Angled)
$12.99
In Stock
1100 Series is the original Greenteeth pocket. In order to run the Greenteeth system, you must use their pocket system. Greenteeth pockets are what holds the Greenteeth cutter tooth inserts. These pockets are made of heat treated, through hardened alloy steel, so they are built to handle most cutting conditions. Pockets are held in place by either grade 8 allen head cap screws or Greenbolts.
The 1100 series is recommended for machines from up to 275 h.p. ratings.
- 3/8" wheels use 1-3/4" bolts
- 1/2" wheels use 2" bolts
- 3/4" wheels use 2-1/4" bolts
- 1" wheels use 2-1/2" bolts
- 1-1/2" wheels use 3" bolts. Bolts are fastened by threaded pockets.
Match this pocket system with the following Greenteeth inserts: - 986 Standard Dish(Green)
- 986 Deep Dish (Red)
- IMPORTANT! PLEASE READ: Greenteeth sizes are not interchangeable! These pockets will only work with 1-1/8" (1100 series) teeth. If you have any questions prior to ordering PLEASE CALL 1-800-322-4539 FOR ASSISTANCE.
Match your pocket system with the following bolt sizes:
Specs
- 3/8" wheels use 1-3/4" bolts
- 1/2" wheels use 2" bolts
- 3/4" wheels use 2-1/4" bolts
- 1" wheels use 2-1/2" bolts
- 1-1/2" wheels use 3" bolts. Bolts are fastened by threaded pockets.
Match this pocket system with the following Greenteeth inserts: - 986 Standard Dish(Green)
- 986 Deep Dish (Red)
- IMPORTANT! PLEASE READ: Greenteeth sizes are not interchangeable! These pockets will only work with 1-1/8" (1100 series) teeth. If you have any questions prior to ordering PLEASE CALL 1-800-322-4539 FOR ASSISTANCE.
Match your pocket system with the following bolt sizes: