Greenteeth LoPro Angled Pocket 900 Series
In order to run the new Tap & Turn Greenteeth system, you must use the LoPro pocket system. The pocket supports the tooth and the tooth clears the way for the pocket. Therefore, the strength of the tooth depends primarily on a strong, well designed pocket. The increased diameter of the LoPro Pocket also provides clearance all the way around the pocket's bore. Additionally, Greenteeth reduced the thickness of the LoPro Pocket by over 30 percent compared to their original 500, 700, and 900 series pockets. This improves the clearance between the side of the pocket and the stump to approximately 3/4". Made of alloy steel and through-hardened, they're designed for industrial use. Match pockets to the series of Greenteeth you're running. SmartBolts are fastened by the threads in the pockets.