Husqvarna Technical Apron Wrap Chainsaw Chaps
SKU
HVA 587 16 07P
SKU
HVA 587 16 07 04
SKU
HVA 587 16 07 05
Professional chainsaw protective chaps from Husqvarna. These technical apron wrap around chainsaw chaps are designed to reduce the risk or severity of injury to your front leg and calf area in the case of a cutting mishap. The chap cover material is made from 1000 denier polyester with a PVC coating. It contains 5 layers of TEK WARP protection material. These chaps come with a felling wedge pocket and Acetal Delrin buckles for attachment. Husqvarna chainsaw chaps are UL certified to ASTM standards. Designed to wash in cold water mild detergent (no chlorine bleach) & hang to dry. Adjustable waist size up to 42".
Color | Orange |
---|
Standards ASTM F1897, ANSI Z133.1. UL® certified. Meets OSHA regulation 1910-266 Measurements Chap Overall Length Reg 32", Long 36", X-Long 40", 2X-Long 44" Pad Overall Length Reg 28", Long 32", X-Long 36", 2X-Long 40" Leg Width 15" at the widest point Adjustable Waist Belt Size 26" to 48" (Extension Available) Material Chap Cover 1000 Denier Polyester Chap Cut Resistant Material 5 Layers TEK WARP protective material Chainsaw chaps are not sized the same way your pants are. Chainsaw chaps are measured from the top of your belt down to the ankle area. Just hook a tape measure in your trousers and go to the top of your foot. Chainsaw chaps should be properly fitted with the adjustable buckles. They should be worn snug, not loose or tight. Chainsaw Pant & Chap Safety Information Chainsaw protective pants and chaps are not represented as a shield against damage, but as an aid to help prevent more severe damage in extreme cases. Chainsaw protective pants and chaps contain material designed to reduce the risk or severity of an injury, and give the operator extra reaction time when contact is made by a moving saw chain. The cut retardant material is designed to "pull" apart and clog up the sprocket system of a gas powered chainsaw and slow or stop the chain from rotating depending on the speed of the chain, length and angle of contact and the power of the saw. Protective pants and chaps should never be considered safer than proper and correct chainsaw handling safety procedures. Chainsaw pants and chaps are designed for gas powered chainsaws and will not stop the sprocket on most electric powered chainsaws. |
Write Your Own Review