Chainsaws

Chainsaw Bars

Chainsaw Carving

Chainsaw Carving Bars

Nose Diameter 3/4" (Dime Tip) WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Cannon Carver (Dime Tip) Chainsaw Carving Bars

.25INDTLOWKICKBACK_IC.PNG

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count* 63/64 (1/4" Pitch) Weight 1.25 lbs (0.56kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain. WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Cannon Carver 12" Chainsaw Carving Bar (Dime Tip) CCD-C1-12-43

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count* 48 (1/4" Pitch) Weight 0.75 lbs (0.34kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain. WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Cannon Carver 8" Chainsaw Carving Bar (Dime Tip) CCD-C1-8-43

Cannon Carver 8" Chainsaw Carving Bar (Dime Tip) CCD-C1-8-50

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count* 77 (1/4" Pitch) Weight 1.4 lbs (0.63kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain.

Cannon Carver 14" Chainsaw Carving Bar (Dime Tip) CCD-C1-14-50

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count* 85 (1/4" Pitch) Weight 1.5 lbs (0.68kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain.

Cannon Carver 16" Chainsaw Carving Bar (Dime Tip) CCD-C1-16-43

Cannon Carver 16" Chainsaw Carving Bar (Dime Tip) CCD-C1-16-50

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count* 63 DL/ 64 DL for 9 Tooth Floating Rim Drive Sprocket (1/4" Pitch) Weight 1.25 lbs (0.56kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain. WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.

Cannon Carver 12" Chainsaw Carving Bar (Dime Tip) CCD-C1-12-50

Nose Diameter 3/4" (Dime Tip) Recommended Pitch 1/4" only Drive Link Count*&nbsp;56 DL Weight 1.25 lbs (0.56kg) *Important Note Drive link counts can vary based on the chainsaw model you are using. Many chainsaw drive sprockets must also be converted if you wish to run the 1/4" pitch carving chain. WARNING: The saw chain in this package is low kickback chain. It met with the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance, ALL CUTTING CHAINS CAN KICKBACK, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator's manual.