Gauge .050" (1.3mm)
Cutter Type Semi-Chisel
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
100' Reel Contains 1848 Drive Links
WARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||Does the 20nk chain get sharpened flat (level), or with your hand down 5 or 10 degrees like most chisel chain? I know the 20nk is semi-chisel. I just filed mine, kept my hand flat, but it's not cutting as well as I'd like.|
|A.||You are correct to hold the file flat (no angle). If you are using a 3/16" file only about 20% - 25% of the file should be above the tooth. If any more than that is above the tooth you'll get a blunt edge. If more than 1/3 of the chain has been used, the depth gauges may need to be taken down.|
|276 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: A from CA on 9/13/2007|
Submit a question for this product (login required).