Gauge .063" (1.6mm)
Cutter Type Chisel
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||Can this chain (.63 gauge) be used with makita 20" (DCS-6401)? I have leftover chains for a Stihl that locked up. Both saws appear to be able to use Oregon 72LGX072G (which is 50 gauge)|
|A.||The problem with the 23RC chain working on the Makita DCS 6401 is that the pitch in the chainsaw is 3/8" while the 23RC is .325 pitch. You would have to convert your saw to .325 sprocket to accept your current chains and would have to get a new bar as well.|
|170 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: CHARLES W from VA on 6/3/2011|
Submit a question for this product (login required).