Gauge .050" (1.3mm)
Cutter Type Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36" (30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
Warning: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||What are the differences between the XC chain and the RC chain? Thank you.|
|A.||They are the same cutter style, but different manufacturers. The XC chain is made by Windsor, while the RC is made by Carlton. Some people notice the Carlton has a slightly harder cutter, some don't. Other than this, they cut about the same and are both good aggressive chains with no safety features.|
|103 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: dan s from ct on 12/3/2008|
Submit a question for this product (login required).