Gauge .063" (1.6mm)
Cutter Type Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This Carlton saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||WILL THIS CHAIN WORK ON MY HUSKY 51 WITH 18" BAR?|
|A.||You'll need to check the chain type that you are currently running. See if your bar is 3/8 pitch (.375) and the gauge on this chain is .063" (1.6mm) with 66 drive links. You should be able to see some of this information on your bar. If not, take the chain off the bar, see what number is stamped on the drive link and count the drive links. Best way to count drive links is to lay the chain flat and group the facing links by twos, and count straight across. With the info on the chain you can phone in your findings or just make another FAQ.|
|80 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: RONALD P from WI on 10/27/2011|
Submit a question for this product (login required).