Bailey's

It is a set of two.

The bracket itself is not adjustable, but they will stack any size wood from 12" +. The 2x4 length should not exceed 8 feet. The overall width of the bracket is 14 inches.

Generally one set holds roughly 1/3 of a cord of wood. A cord is (1.33' x 8' x 4') x 3, or 128 cu ft. So if you mix in some pieces longer than 16" you can probably get close to a cord if you used 3 sets along with 8' 2x4s. If you want to get exact you have (shaving 4" off the height and 6" off the l

Generally one set holds roughly 1/3 of a cord of wood. A cord is (1.33' x 8' x 4') x 3, or 128 cu ft. So if you mix in some pieces longer than 16" you can probably get close to a cord if you used 3 sets along with 8' 2x4s. If you want to get exact you have (shaving 4" off the height and 6" off the length): (1.33' x 7.5' x 3.66') x 3 or very close to 110 cubic feet of wood using 3 sets of stackers (18 cu ft shy of a cord). So you would need exactly 3.5 sets if you only had 16" firewood. Again, if you were to mix in 20" pieces you could probably get a cord with 3 sets.
(Hide full answer)

This specification comes from the manufacturer's recommendation. In theory you are correct, but as someone who has about 15 sets of these on my property I can tell you that even on flat ground the nature of stacked wood is such that unless you stack it perfectly, it can become unstable as the length

This specification comes from the manufacturer's recommendation. In theory you are correct, but as someone who has about 15 sets of these on my property I can tell you that even on flat ground the nature of stacked wood is such that unless you stack it perfectly, it can become unstable as the length of your stack increases. Much of the stability also depends on the species and weight of the wood, whether it's perfectly straight, stacks well, etc... As you start to deplete the stack by picking pieces off of a long stack it can start to wiggle and become unstable (especially dangerous if you have animals or kids around). Without getting into the physics of it, I'd just say from experience that you probably want to stick with 8' long stacks.
(Hide full answer)

Actually the manufacturer is out of Illinois and they get about that temperature on a regular basis during the winter. The employees there don't have a problem with these stackers in cold weather. However they tell me that if they do crack, the warranty will still apply and they will replace them.

Pro's: 1. If you cut 16" logs, holds 1/3 cord with 8' long 2x4's. 2. Keeps a nice clean rack and provides a stack that can air dry easily 3. Easy to move when time to relocate wood stacks. Cons: 1. Treated 2x4's had to be planed to fit in slots 2. A couple have cracked, although they are still in use 3. Unless stacking on asphalt or concrete, can tip over pretty easily especially when tarped. Good option considering price versus result.

i've been using these brackets for 2 years now and they are still taking the abuse. i guess the plastic is strong enough.

These brackets seem to be well made. The plastic is of a more brittle type than I hoped, but seems to be sturdy. Kudos to Baileys for quick ship and accurate description. These brackets will help tame a monster wood pile... (new Dolmar).

Full disclosure: Bailey's director of marketing, here. I originally bought a few pairs of these stacking brackets from another online seller last summer. After using them myself, I knew that we had to feature them in the Bailey's catalog. The customer response has been overwhelmingly positive. I can tell you first-hand that they go up in seconds without any tools and seem to hold up extremely well no matter what kind of wood you stack on them. I've built my own firewood racks in the past but I'll never do it again. No nails, hammers, or screws. Highly recommended.