Bailey's

Adding to cart...

Item # WR375 38XC

Usually ships in 1 week.

Shipping weight 0.01 lbs.

Pricing: Please call 1-800-322-4539 for information.

WoodlandPro 38XC Chainsaw Chain (Per Drive Link)

Get Oregon cutting performance with a WoodlandPro chassis. The WoodlandPro X-series chain is made with Oregon 73LG type cutters on a heavy duty chassis to give you one fast cutting chain. Round chisel cutters work well in both softwoods and hardwoods. 38XC works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. Chain is .375 pitch x .058 gauge. 38XC fits saws using Oregon 73 series chain. 38XC chain sharpens with a 7/32" round file or 3/16" grinding wheel.

Priced per Drive Link
We will build a chain loop with the total quantity you enter

Item # WR375 38XC

Usually ships in 1 week.

Shipping weight 0.01 lbs.

email product to a friend

Specifications

Product Q & A

Reviews

Pitch 3/8" (.375")
Gauge .058" (1.5mm)
Sequence Standard
Cutter Type Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Recommended Bar Lengths 12"-36" (30-90cm)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No

Warning: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Showing questions 1 - 1 of 1

Page: 1

Q.	Is this a low kickback chain? Is the 38XC more or less aggressive than the 38RC (I have purchased 7 loops of the RC from you and like it)? What is your fastest cutting chain in 3/8 pitch .058 Ga? Thank You.
A.	This style chain is very similar in tooth design as the 38RC, neither of which have any anti-kickback features. This is the most aggressive .058 gauge chain we have in 3/8" pitch. If you have .050 or .063 gauge bars then the 72CL or 75CL (respectively) is a bit more aggressive. The later are Square ... (See full answer) This style chain is very similar in tooth design as the 38RC, neither of which have any anti-kickback features. This is the most aggressive .058 gauge chain we have in 3/8" pitch. If you have .050 or .063 gauge bars then the 72CL or 75CL (respectively) is a bit more aggressive. The later are Square Chisel chains that require a square file and only work well in very clean conditions. (Hide full answer)
	219 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Scott M from Mass on 8/28/2008