Bailey's

Adding to cart...

Only $15.99

Item # WPL 20RC66

In Stock

16" WoodlandPro Chainsaw Chain Loop (20RC-66 Drive Links)

This fast cutting chain is perfect for today's medium sized, high performance chainsaws. Round chisel cutters work well in both softwoods and hardwoods. 20RC works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. Chain is .325 pitch x .050 gauge. 20RC fits saws using Oregon 33 series and Stihl 23 series chain. 20RC chain sharpens with a 3/16" round file or 1/8" grinding wheel. Chain manufactured in the U.S.A. by Carlton.

Only $15.99

Item # WPL 20RC66

In Stock

email product to a friend

Specifications

Product Q & A

Reviews

Pitch .325"
Gauge .050" (1.3mm)
Sequence Standard
Cutter Type Chisel
Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No

WARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Filing Angles for WoodlandPro and Carlton Chainsaw Chain (249K pdf file)

Showing questions 1 - 4 of 4

Page: 1

Q.	I need a chain for my Husqvarna 435 .325 66dl .50. Do you know if this will fit?
A.	Greetings - Yes, this will fit.
	154 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Jason from Arkansas on 1/26/2010

Q.	I need a chain for my Dolmar 5100. The spec is .325 - .050 - 66dl. Will this one fit?
A.	It sure will fit. We think of chain by Pitch, gauge and drive link count. If all 3 match you are good to go.
	119 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Dan from GA on 3/6/2010

Q.	How would this chain perform on my Husky 345 as opposed to the 20NK that I have been using? Normally clean cutting conditions.
A.	The 20RC chain will take a bigger bite than the NK. Your Husqvarna 345XP should be up to the challenge to pull that through clean wood. The 20NK is fast and holds its edge well in dirty conditions or even a good choice for under horse powered saws. You may want to try a fresh chain of both on your s ... (See full answer) The 20RC chain will take a bigger bite than the NK. Your Husqvarna 345XP should be up to the challenge to pull that through clean wood. The 20NK is fast and holds its edge well in dirty conditions or even a good choice for under horse powered saws. You may want to try a fresh chain of both on your saw and get back to us on your experience. (Hide full answer)
	114 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: HARRY B from NY on 3/1/2011

Q.	I'm confused. Is this full chisel or semi chisel? Why would you call full chisel chain round chisel? "Round chisel cutters work well in both softwoods and hardwoods. 20RC works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. " Your description is typically used to describe full chisel chains.
A.	This chain is called either Round Chisel or Chisel. Full chisel is square chisel and generally used in clean conditions. Semi-chisel is used in dirty sandy conditions.
	64 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: DAVID S from KS on 12/5/2011

Showing questions 1 - 4 of 4

Page: 1

Bailey's

Find us on Google+

Language

16" WoodlandPro Chainsaw Chain Loop (20RC-66 Drive Links)

Additional Specs