Bailey's

Adding to cart...

Only $.37

Item # WP14 10SC

In Stock

Shipping weight 0.01 lbs.

WoodlandPro 10SC Chainsaw Chain (Per Drive Link)

WoodlandPro 10SC is the 1/4" pitch chain professional carvers desire. This chain is built with performance in mind. It is aggressive enough to remove large chunks of wood, yet small enough to give you tiny detail. It contains no guard links so it bores with little effort. Chain also works well on standard chainsaws with 1/4" sprockets. Sharpens with a 5/32" round file or 1/8" grinding wheel. Chain manufactured in the U.S.A. by Carlton.

Priced per Drive Link
We will build a chain loop with the total quantity you enter
100' Reel is also available WP100 10SC

Only $.37

Item # WP14 10SC

In Stock

Shipping weight 0.01 lbs.

email product to a friend

Specifications

Product Q & A

Reviews

Pitch 1/4" pitch (.250")
Gauge .050" (1.3mm)
Sequence Standard
Cutter Type Semi-Chisel
Recommended Saw Sizes up to 2.3 cubic inches (38cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No

WARNING: This WoodlandPro saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Showing questions 1 - 6 of 6

Page: 1

Q.	When you say you will build a chain loop, does that mean you will put the chain together so that it can go directly on the chainsaw? If I buy 50' of chain, do you make 10 or 12 chains out of it ready to be put on the saw?
A.	If you purchase individual loops we will always complete the loop unless otherwise instructed by the customer. If you buy in bulk (50' or 100' reel) and want us to loop it for you then there is an extra charge per each loop spun.
	368 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Dwight K from Il. on 11/20/2008

Q.	Will this chain fit my Stihl 020av 14" chainsaw?
A.	Some older model 020 saws did come with the 1/4" sprocket. If you count 80+ drive links on your 14" bar then you have 1/4" pitch and this chain will work.
	314 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: craig h from pa. on 1/10/2009

Q.	Will this chain fit my 12" Homelite Textron XL Automatic Oiling saw? The existing chain on it has 42 drive links,is 1/4"pitch and has a marking of either "91" or "16" on each drive link.
A.	No, 91 chain is 3/8 low profile chain. You need either the 30LP, 91VX or 91VG chains. Choose one of these listed chains and put in 42 as the quantity you need to purchase, as we do not have a pre-made loop at 42 drive links.
	312 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: MIchael T from Virginia on 1/24/2009

Q.	I have a Redmax G3200 that has ORF 25AP 1/4"x.050, 68 drive links. Would this 12" fit, or would it require a different number of links?
A.	If your bar takes 68 drive links of 1/4" pitch chain, that is what it takes.
	151 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: TERESA B from TN on 2/12/2011

Q.	Will this fit my Sthil 015, 14" bar, 72 Drive Links ?
A.	It sounds like it. This chainsaw chain is the same as Stihl's 13RM. You should see a 1 stamped on the drive link on your current chain if it is a Stihl branded chain.
	64 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: KEN K from WA on 7/18/2012

Q.	Would this chain fit a 12" Echo CS-302 saw?
A.	Best way to know is see if you can get information off the bar you intend to use. The Echo CS302 did come stock with 1/4 pitch chain, so if that is still what you are running, this chain will work just fine.
	5 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: W G from VA on 4/8/2013