Bailey's

Adding to cart...

Only $7.49

Item # ORF 11892

In Stock

Shipping weight 0.08 lbs.

Oregon Power Mate Rim (Small Spline) 325 x 7 Tooth

Oregon Power Mate rim sprockets for chainsaws. Rims float on the splined hub of the drum and move side to side, allowing the chain and rim to align with the bar as the chain travels around the bar’s groove. The rim gets most of the sprockets wear, and by being replaceable, it extends the overall life and value of the sprocket system. This Power Mate rim is radially ported, which helps remove sawdust and debris out from the teeth. This rim also has wear depth indicators which tell you when to replace your rim. Standard splined rims have a sprocket bore of approximately 3/4". This rim is a .325 x 7 tooth configuration. Replaces the following part numbers:

Husqvarna/Jonsered 501 45 74 02

Only $7.49

Item # ORF 11892

In Stock

Shipping weight 0.08 lbs.

email product to a friend

Specifications

Product Q & A

Reviews

Showing questions 1 - 9 of 9

Page: 1

Q.	Is this what I need for my Husky 455 Rancher to run a narrow kerf bar and chain?
A.	Yes, that is correct.
	309 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: John H from VA on 5/15/2009

Q.	I am currently running a 3/8 050 chain and bar on my 346XP grey cover and want to go to a 325 chain. Would I have to change sprockets or are they all the same for pitch and gauge? What gauge is preferable for this saw with a 325, 050 or 058? Thanks
A.	If your sprocket is the Rim & Drum style you would need the RSS 3257 rim for the 325 chain, and a 325 tip on your bar. The rims are not gauge specific. The .050 gauge has more styles available and usually is more economical, so it is the preferred size for 325 pitch on Husky saws.
	279 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: leon from PA on 6/13/2009

Q.	Does this item fit Stihl ms 270 with Oregon rim and drum setup?
A.	Greetings - Yes, this item will fit any Oregon drum on the 270. We always suggest that anyone buying a rim also verify the pitch of your chain if not already known.
	139 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: vin from ohio on 2/11/2010

Q.	Will this replace the rimm sprocket on a dolmar ps5100s running ,325 chain? Thanks
A.	It should work fine. Just to verify the inside diameter of your current spline first. It should be 3/4".
	125 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Dale from n/a on 3/9/2010

Q.	I have a Power Mate 34162X Type A on a STIHL 029. Is this the rim I need to order ?
A.	Yes, this is the correct rim. We try to include the replacement rim specs in the rim and drum of the same. This rim is .325 verify your pitch of your current bar and chain set up before ordering.
	97 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: TOMMY W from TN on 7/14/2011

Q.	will this fit a husky 55 model?
A.	Yes, this will suit your Husqvarna 55 if you are currently wanting to use .325 pitch chainsaw chain. Some 55s came stock with 3/8 pitch. If you want to run 3/8 see ORF 18720.
	29 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: LEE A from ME on 11/15/2012

Q.	I have 2 Stihls 270 and 026 Pro. I want to be able to use the chain and bars from the 270 on the 026. (.325 .63 74dl on 18' bar) Which rim sprocket do I need?Thanks
A.	This rim will suit your wish perfectly as it is good for the Stihl MS270 and the 026 Pro.
	27 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: RON C from IN on 11/27/2012

Q.	I am wanting to change the 3/8 chain 1.5 mm gauge bar on my Husqvarna 359 E-tech to 0325 chain on a 1.3 mm bar. Apart from the new bar & chain, is this the only other part I will have to change on the saw? Thanks in advance!
A.	Just this spline change should work for you. If you have a spur system, then, you'll have to look at the ORF 108215X and follow the directions for switching over your 359.
	29 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: WILLIAM S from BC on 11/28/2012

Q.	I currently run a MS 360 with .375 pitch. I would like to interchange with .325 bar and chain. Is this the right rim?Thank you,
A.	Yes, this would be the correct rim so your Stihl MS360 will run .325 pitch chain. Of course you know you'll need a .325 pitch bar too. You can use our handy dandy bar finder to find the length that you are interested in.
	20 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: KURT H from CA on 2/17/2013