Bailey's

Adding to cart...

Average rating:

Only $9.99

Item # 31117

In Stock

Shipping weight 0.30 lbs.

Clutch Removal Tool for Husqvarna 365, 372, 385, 575

This tool is required to remove the clutch from certain model saws. This means you will need this tool to replace your clutch and drive sprocket. Each tool has a 19mm nut fitting so you can easily adapt a socket or bar wrench to torque. Clutches are reverse threaded, so be sure to turn the proper direction. A piston stop will help.

Note: This clutch tool will not work on 385s and 390s with spiral clutch springs. If you have a saw like that please use #HVA 504 00 23 01 Clutch Tool.

Only $9.99

Item # 31117

In Stock

Shipping weight 0.30 lbs.

email product to a friend

Specifications

Product Q & A

Reviews

Fits the Following Chainsaws:
Husqvarna 362, 365, 371, 372, 385, 390, 570, 575, 576
Jonsered2063, 2065, 2071, 2163, 2165, 2171, 2186

Need a clutch tool for the 560 or 562? See HVP 575 25 14 01

Showing questions 1 - 5 of 5

Page: 1

Q.	What Tool do I need for clutch removel for a Husky 455 Rancher?
A.	You would need the 31118 clutch tool.
	312 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Mike A from Vermont on 9/6/2008

Q.	What tool would I need to remove the clutch in a Dolmar 7900?
A.	For the clutch you would need a tool, item # DM 944 500 570 from Dolmar. We do not have this part in the system so please call if interested. If you are just removing the drum then you just remove the clip.
	240 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: mike from massachusetts on 5/5/2009

Q.	Will this work on a 262xp?
A.	No, you just need a socket to remove it.
	205 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Jonah D from Montana on 9/7/2009

Q.	Will this work on a Husgvarna 359??
A.	No, the 359 uses item # 10610, or 502 52 22 02.
	213 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Tom from NM on 10/7/2009

Q.	Which tool do I need to remove Stihl MS290 clutch?
A.	The 290 just has a clip you remove the clutch drum, and a socket with a piston stop to remove the clutch. Besides the Piston Stop there is no special clutch tool required for that saw.
	220 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Sammy G from ms. on 10/11/2009