Bailey's

Adding to cart...

Average rating:

Was $94.99
Now Only $85.99
You Save $9.00 (9%)
Item # OPC 20 CJ50

In Stock

Oregon 20" Power Match Bar and 2 Chain Combo (200RNDK095 / 72LGX072G)

Get a great deal on this professional bar and chain combination! Combo includes one Oregon Power Match replaceable sprocketnose bar and two loops of new Oregon 72LGX chisel saw chain. Oregon Power Match bar is the industry standard for professional chainsaw users. These solid chainsaw bars are machined from super-tough chrome-moly steel to give you excellent resistance to wear and chipping. The replaceable sprocket nose design fastens with a single rivet, and is securely held by wide, strong, overlapping ears. Noses can easily be replaced in the field. The patented Cradle sprocket design gives superior resistance to sprocket nose failures. Advanced Lubrijet and Lubri-Dam lubrication features increase oiling efficiency and retention with less oil hole plugging issues.

Additional Specs

Cutting Length 20" (50.8cm)
Pitch .375" (3/8")
Gauge .050" (1.3mm)
Drive Link Count 72 (.375 Pitch)
Chain Type 72LGX Chisel Chain
Mount K095

Fits the following chainsaws with 3/8" Pitch Drive Sprockets:

Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Cub Cadet CS5018, CS5220, CS5720
Efco 147, 152, 156, 165
Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-6800
Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES
Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445, 450, 455 Rancher, 460, 1400, 1600
John Deere CS46, CS52, CS56, CS62
Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159
Makita DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i
Maruyama POLESAWS: MC-PL11, MC-PS11
McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20
Olympyk (Oleo-Mac) 941, 945, 950, 951
Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000
Pioneer 1074, P-21, P-26, P-28, 3270
Poulan 325
Powerhorse 190502, 190503
Redmax G390, G450AVS, G455AVS, G3800
Sears 35084, 35201
Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656
Stanley CS05, CS06

Warning: This Oregon saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Was $94.99
Now Only $85.99
You Save $9.00 (9%)
Item # OPC 20 CJ50

In Stock

email product to a friend

Specifications

Product Q & A

Reviews

Cutting Length 20" (50.8cm)
Pitch .375" (3/8")
Gauge .050" (1.3mm)
Drive Link Count 72 (.375 Pitch)
Chain Type 72LGX Chisel Chain
Mount K095

Fits the following chainsaws with 3/8" Pitch Drive Sprockets:

Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
Cub Cadet CS5018, CS5220, CS5720
Efco 147, 152, 156, 165
Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-6800
Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES
Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445, 450, 455 Rancher, 460, 1400, 1600
John Deere CS46, CS52, CS56, CS62
Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159
Makita DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i
Maruyama POLESAWS: MC-PL11, MC-PS11
McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20
Olympyk (Oleo-Mac) 941, 945, 950, 951
Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000
Pioneer 1074, P-21, P-26, P-28, 3270
Poulan 325
Powerhorse 190502, 190503
Redmax G390, G450AVS, G455AVS, G3800
Sears 35084, 35201
Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656
Stanley CS05, CS06

Warning: This Oregon saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Showing questions 1 - 6 of 6

Page: 1

Q.	I Have A McCulloch Timber Bear running 3/8" pitch 70 drive link Factory 20" Bar. Can I change to this Bar & chain in 72DL?
A.	The later model Timber Bears used this same mount. So if your current bar slot is 8.2mm (.322") then this combo will fit.
	339 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Adis H from TN on 8/30/2009

Q.	Will this bar fit my Husky 362xp?
A.	That saw can have either 8.2 mm bar studs, it which case this will fit. Or it can have 9mm bar stud, in which case you would need the OPC 20 HU50. You will need to measure the bar stud.
	312 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: gene r from ny on 9/9/2009

Q.	Will this combination fit the 510 Dolmar?
A.	Yes it will.
	268 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Brian from Iowa on 10/25/2009

Q.	I also would like to know the Oregon mount pattern code stamped on this bar. Does it end in D176?
A.	If you know your Oregon bar number the last 3 digits indicate the mount, per your comment above. This bar would be the "D095" mount. To search for all D176 mounts use "@D176" in the search field because the @ works as a wild card in our system. This will bring up all the 176 mounts, which we use "MC ... (See full answer) If you know your Oregon bar number the last 3 digits indicate the mount, per your comment above. This bar would be the "D095" mount. To search for all D176 mounts use "@D176" in the search field because the @ works as a wild card in our system. This will bring up all the 176 mounts, which we use "MC" to denote. (Hide full answer)
	264 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: brian t from MN on 11/4/2009

Q.	I have a Husqvarna Rancher 55. How does this bar and chain compare with the stock Husqvarna brand bar and chain?
A.	Oregon normally makes the bars the come on any Husky saw. This is not to say that some dealers don't switch out the bars with a different brand. But if your bar said "Husqvarna" it was an Oregon bar. Sometimes they put the laminate bars which have no replaceable tip. The above bar is solid steel so ... (See full answer) Oregon normally makes the bars the come on any Husky saw. This is not to say that some dealers don't switch out the bars with a different brand. But if your bar said "Husqvarna" it was an Oregon bar. Sometimes they put the laminate bars which have no replaceable tip. The above bar is solid steel so it is more stout than the laminate version. (Hide full answer)
	329 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: Rick H from MO on 11/8/2009

Q.	I have a stock Husky 359 and was wondering if I have to change the drive sprocket to run this bar & chain?
A.	Chances your stock saw came with 3/8 pitch then this bar and chain combo will work.
	265 people found this answer helpful.
	Was this question helpful? Yes
	Posted by: EARL W from NS on 4/21/2010

Showing questions 1 - 6 of 6

Page: 1

Showing reviews 1 - 2 of 2

Page: 1

20" Power Match

Posted by: RANDY W from LA on 6/12/2012

Rating:

Bought this combo for my Husqvarna 359 in 20". Cuts much faster than stock chain and bar is sturdier. Clearing trees on property and had man cutting firewood. He was impressed with the speed in which I could cut large diameter wood with my saw. He asked to try it and wanted to buy my saw with this bar and chain. Told him where he could get the bar and chain for his saw but I was keeping mine. I agree that it has a higher tendancy to kick back, but is not a problem if you don't get careless. Want to get a 24" bar and chain next. Worth the price for heavy cutting.

109 people found this review helpful.

Was this review helpful? Yes

Great value

Posted by: DUSTIN W from NE on 3/28/2011

Rating:

This is a great combo, I liked it so much I ordered another combo in 28" for my Husqvarna 394. This 16" set went on my Husqvarna 455 Rancher, I was never really happy with my 20" bar for this saw because it was just a tad too long for what this saw can handle with speed. In my area to get a bar by itself locally was well over $45 with out a chain and most wanted another $20+ for a chain. The Powermatch plus bars are what the Husqvarna uses as their brand just renamed. The chain is Oregon low kick back chain. I will say the LGX series chain cuts leaps and bounds faster then the stock chains I have been running. It holds its edge much better then the stock chains, however it does have the potential for serious kickback. If you are looking at either a power match bar or the LGX series chain it is well worth the money and I highly recommend it.

209 people found this review helpful.

Was this review helpful? Yes

Showing reviews 1 - 2 of 2

Page: 1