Bailey's

Logosol PH360 4-Head Moulder / Planer (3-Phase 220V)

The PH360 is the latest 4-head planer/moulder from Logosol. The PH360 is right at home in woodworking shops, timber yards, home building facilities and sawmills of all types. This machine makes everything from fine trim work to log home beams with precision. You can feed rough sawn lumber into the PH360 and a beautifully finished product will come out the back. The powerful cast iron table is the heart of the machine, guaranteeing vibration-free operation. It is bolted onto a stable steel base with solid foundation support. The bottom cutter, side cutters and integrated feeder tables are set into the cast iron table. [SHOW MORE...] The PH360 is the latest 4-head planer/moulder from Logosol. The PH360 is right at home in woodworking shops, timber yards, home building facilities and sawmills of all types. This machine makes everything from fine trim work to log home beams with precision. You can feed rough sawn lumber into the PH360 and a beautifully finished product will come out the back. The powerful cast iron table is the heart of the machine, guaranteeing vibration-free operation. It is bolted onto a stable steel base with solid foundation support. The bottom cutter, side cutters and integrated feeder tables are set into the cast iron table.

Changing profiles is quick and easy, just like all Logosol machines. You can change from small mouldings, such as flooring or crown mouldings, to a six inch log house timber in less than 20 minutes. Because both the height and width setting are adjustable by a crank handle, you can go from a 4" wide panel to a 6" wide panel in under a minute!. The machine can shift up to 14" in width!

The PH360 requires at least a 4kW chip extractor/blower to remove sawdust and chips from the machine. We recommend using flexible 4" and 5" flexible dust collection hose to connect to the dust ports. Feed tables come with the machine and are at a set height so they are easy to extend and adapt to manage the massive volumes of wood the machine is capable of processing.

Each of the machine's cutters has its own large motor, sufficient for every imaginable type of processing of every possible type of wood. Feed rate is continuously adjustable up to 98 ft/min. A realistic feed rate for one person to handle is around 20 ft/min, while two people can handle a speed of approximately 49 ft/min to keep up a smooth work tempo. The PH360 requires a 3-phase 60-amp electrical supply. Keep in mind that power is also drawn by the blower, which will also require a 40-amp supply. So between the two machines, a 100-amp supply is recommended.

All the settings you need can be found on the same side of the machine, which means that the machine can be set up close to a wall, thereby saving space. The handles that set height and width have gauges, so you can easily read off measurements down to a fraction. The lever for rapid setting of the straight guide is easily accessible from the feed table, and therefore also close to the control panel. There is a separate start, stop and lamp for each cutter and for the feeder unit. Through-feed and out-feed from the machine. The five powerful feed rollers also surpass expectations when it comes to feeding resinous and wet wood. Mechanical variable gear for setting feed rate from 10ft/min( 3 m/min) to approximately 98 ft/min (30 m/min). Knives and cutters factory mounted for four-sided dimensional planing. Top and bottom cutters are combined straight planing cutters and moulding knives. Both functions can be used simultaneously. You can also straight plane and mould from all four sides in one step.

Finally the PH360 is easy to set between processing runs. It normally takes about 20 minutes to reset the machine from one mould to another. Logosol has a catalog with over 500 different moulding knives to choose from. All machines have been test run before shipping.

Heavy item - Please call 1-800-322-4539 for a shipping quote.
[SHOW LESS...]

Additional Specs

• Maximum Planing Dimensions
  4-sided Planing
  Maximum Width: 14" (360 mm)
  Maximum Height: 5" (130mm)
  2-Sided Planing
  Maximum Width: 16" (410mm)
  Maximum Height: 9" (230mm)
  1-Sided Planing
  Maximum Width: 20" (510mm)
  Maximum Height: 9" (230mm)

• Top Horizontal Cutter Specs
  Diameter: 3.46" (88mm)
  Width: 20" (510mm)
  Motor Output: 7.5hp (5.5kW)
  Rotational speed: 7,000 rpm
  Maximum Cutting Depth when Planing: 5/16" (8mm)
  Maximum Cutting Depth when Moulding: 3/4" (20mm)

• Bottom Horizontal Cutter Specs
  Diameter: 2.83" (72mm)
  Width: 16" (410mm)
  Motor Output: 5.5hp (4kW)
  Rotational speed: 7,000 rpm
  Maximum Cutting Depth when Planing: 5/16" (8mm)
  Maximum Cutting Depth when Moulding: 3/8" (10mm)

• Side Cutter Specs
  Spindle Axle Diameter: 1-3/16" (30mm)
  Spindle Height: 5" (130mm)
  Maximum Cutter Diameter: 5.5" (140mm)
  Motor Output: 4hp (3kW)
  Rotational Speed: 7,000 rpm
  Maximum Cutting Depth: 1-1/8" (30mm)

• Vertical Cutterhead Specs
  Quantity: 2
  Type: TB90 (2-knife)
  Body Diameter: 3.46" (88mm)
  Body Height: 1-1/2" (40mm)
  Cutter Type: 50mm HSS Planer Knives

• Feed System Specs
  Output: 1hp (0.75kW)
  Std Feed rate: 11-52 ft/min (3-15 m/min)
  Optional Feed rate: 20-98 ft/min (6-30 m/min)

• Electrical System
  Total output: 22hp (16.25kW)
  All motors are equipped with overheating protection.
  Electrical Connection: 3-phase, 230 Volts, 60hz, 60 Amps

• Dimensions and Weight
  Length and Width: 114" X 45" (2,970mm x 1,125mm)
  Height: 56" (1,430mm)
  Weight: 1,322 lbs (600kg)