Bailey's

8" Black Bear Rifled Falling Wedge (Each)

Black Bear Rifled falling wedges were invented by a logger named Page Montgomery, who wanted a wedge that would drive straight and was easily stackable. After many trials, he came up with the current design. These wedges look like any other plastic falling wedge from a distance, but upon closer inspection, you will notice that each wedge has two 1/8" raises "V" guides on one side and two inverted "V" slots on the other. The final product is a wedge that drives incredibly straight and when stacked, does not trend sideways. On small trees, these wedges can be used for side wedging, with less chance of it spitting out the backcut.

• Note: 8" & 10" Black Bear wedges will stack, while the 12" will only stack with itself.

Additional Specs

• Overall Length 8-1/4" (20.9cm)
  
• Tip Width 2-11/16" (6.9cm)
  
• Butt Width 2-11/16" (6.9cm)
  
• Butt Height 1" (2.5cm)
  
• Butt Height @ Rifle End 1-1/8" (2.9cm)
  
• Rifle to Rifle Width 1-15/16" (5.0cm)
  
• Surface Smooth with 1" texture on tip
  
• Taper Single
  
• Weight .55 lbs (250g)