Gauge .050" (1.3mm)
Cutter Type Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||I'm building up a new saw which currently does not have a bar or chain...long story short is the saw is an 066 with a 3/8" x 8 rim on it currently and I'm wanting a 20 or 24 inch bar. How many drive links would you recommend going with? The standard # for those bar lengths or + 1 link to account for the 8 tooth rim sprocket?|
|A.||You are absolutely right. When adding a tooth to the basic 7 tooth spline configuration, you need to add one drive link. So on a 20" bar you'll need 73 drive links and for a 24" bar you'll need 85.|
|1 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: KURT C from WV on 10/17/2013|
Submit a question for this product (login required).