Gauge .050" (1.3mm)
Cutter Type Semi-Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.
Showing Questions 1 of 1
|Q.||will this chain fit my echo cs-400 with 18 inch bar?|
|A.||It looks like the Echo CS400 came stock with lo-profile chain. It is slightly smaller than the full size 3/8 chain of the 30SC. You should be taking a look at loops with 62 drivers for your 18". Always verify the pitch of your chainsaw. Most often there are indicators on your bar. If you have stock chain and bar, then take a look at #WPL 30LP62.|
|17 people found this answer helpful.|
|Was this question helpful? Yes|
|Posted by: KENNETH E from MA on 2/25/2013|
Submit a question for this product (login required).